ABB Installation Products J6-66P6P6-35 35kV, 6 Point Junction, 2 X (600 Amp Bushing Interface), 2 X (Parking Stand, 600 Amp…
UPC: 075114156646
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 35kV voltage rating for medium-voltage applications
- 6-pole configuration for multi-point distribution
- Dual 600 Amp bushing interfaces for power transfer
- Integrated 600 Amp parking stands for maintenance access
- Adjustable tilt mounting (15°, 30°, 45°, 60°) with optional adapters
- Standard 4" or optional 6.5" interface spacing
- Includes mounting hardware, lubricant, instructions, and protective caps
- Parking stand options: left (L), right (R), or none (N)
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Connection Type | Bushing Interface |
Current Rating | 600 A |
Material | Molded Composite |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Mounting | No Tilt Mounting Bracket |
Mounting Type | Adjustable Tilt (15°-60°) |
Poles | 6 |
Series | J6 |
Size | Overall Length 31 inches, Width 6-3/4 inches |
Size | 6-pole junction with 4" or 6.5" spacing |
Special Features | 4 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 6 Points |
Voltage Rating | 35 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
J6-622226-25
6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.
J5-62226-15-TMA
5 Point Junction, with one 600 Amp Bushing Interfaces, three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interfaces, 15kV, Tilt Mounting Adapter.J5-62266-15-SV
5 Point Junction, with one 600 Amp Bushing Interfaces, two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing Interfaces, 15kV, 6-1/2 inch centers. No Tilt Mounting.J5-22226-25-TMA
5 Point Junction, with four 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interface, 25kV, Tilt Mounting Adapter.J6-22222B-25-TMA
6 Point Junction, 5 200 Amp Bushing Well Interfaces and one Blank position, 25/28kV, Standard spacing on 4 inch centers, with Tilt Mounting Adapter.
J3-626-15-SV-N
3 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 15kV, 6-1/2 inch centers. No Parking Stand.Frequently Asked Questions
What are the voltage and current ratings?
The junction is rated for 15/25/35kV and 200/600 Amp.
What standard does the junction meet?
The junction meets ANSI/IEEE Standard 386, Latest Revision.
What items are included in a standard kit?
Each kit includes a basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and a protective cap.
What are the continuous and momentary current ratings?
Continuous current ratings are 200 Amp or 600 Amp. Momentary and fault close ratings are 10kA Sym or 25kA Sym for 10 cycles, respectively.
What is the 35kV class operating voltage?
For the 35kV class, the maximum phase-to-ground operating voltage is 21.1kV.
What is the 25kV class operating voltage?
For the 25kV class, the maximum phase-to-ground operating voltage is 16.2kV.
What is the 15kV class operating voltage?
For the 15kV class, the maximum phase-to-ground operating voltage is 8.3kV.
What interface options and spacings are available?
The modular design allows for 200A deepwell or 600A bushing interfaces with 4'' or 6.5'' spacing.
What functions can this junction perform?
It can be used for sectionalizing, looping, tapping, and equipment bypass.
What are the typical applications for this junction?
ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications.
How to Install a Deadbreak Junction with Universal Mounting
This guide provides detailed instructions for installing a 15/25/35kV, 600/900 Ampere Deadbreak Junction using the universal mounting method, including assembly, grounding, and initial preparation for operation.
Estimated time: 1h
Tools needed:
Wrenches (for 3/8" and 1/2" hex nuts and cap screws), Wire strippers, Multimeter, Marking tool
Supplies needed:
Deadbreak Junction, Base Bracket, Base Plate, Universal Brackets (4), Mounting Hardware Prepack, Suitable fasteners (for attaching universal brackets to mounting surface), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated caps (for unused bushings)
- De-energize and Prepare Mounting Location
DANGER: Ensure all apparatus is de-energized before beginning installation. Verify the circuit is de-energized using appropriate safety procedures and equipment. Determine the desired location for the junction assembly. Using the base plate as a template, place it on the mounting surface and mark all four slot locations for the universal brackets.
- Attach Initial Universal Brackets
Attach two (2) universal brackets to the marked slot locations on the flat mounting surface using suitable fasteners. Tighten these fasteners securely to prevent any movement during operation.
- Assemble Remaining Universal Brackets
Attach the remaining two (2) universal brackets to the two brackets already mounted on the surface. Use the supplied 3/8” hex head cap screws, external tooth lock washers, and 3/8” hex nuts. Mount them at the desired angle and tighten securely.
- Assemble Junction to Base Bracket and Base Plate
Assemble the deadbreak junction to the base bracket assembly and base plate. Use two (2) 1/2” hex head cap screws, two (2) 1/2” split lock washers, and two (2) 1/2” hex nuts. Attach them to the center mounting holes on the bracket assembly and tighten securely.
- Attach Junction Assembly to Universal Brackets
Attach the complete deadbreak junction assembly to the universal brackets using the supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Ensure the parking stand is in the upright position and tighten all hardware securely.
- Ground the Assembly
Connect a grounding wire (No. 2 solid to 1/0 stranded) to the grounding lug provided on the base bracket. Ensure the base bracket assembly and the junction’s black conductive jacket are properly grounded to prevent electrical hazards.
- Prepare Operating Interfaces
Remove all protective shipping caps from the operating interfaces. Clean each interface thoroughly and lubricate them with an ELASTIMOLD approved lubricant. DO NOT substitute other lubricants, as they may harm the product or its mating parts.
- Install Insulated Caps on Unused Bushings
If not all operating interfaces will be utilized, install appropriate HV insulated caps on any unused bushings before energizing the circuit. Do not use the protective shipping caps for this purpose, as they are not insulated.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.