
ABB Installation Products J2-26-15-SV 2 Point Junction, 15kV, with one 200 Amp Bushing Well Interface and one 600 Amp Bushing…
UPC: 783786967605
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15kV rated 2-point junction for medium-voltage systems
- Dual bushing interfaces: 200 Amp and 600 Amp
- 6-1/2 inch center spacing for standard mounting compatibility
- No tilt mounting design for simplified installation
- Compact design for efficient cable management
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Connection Type | Bushing Well interface |
Current Rating | 200 A, 600 A |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Mounting | No Tilt Mounting Bracket |
Mounting Type | No Tilt Mounting |
Size | Overall Length 19-1/2 inches, Width 6-3/4 inches |
Size | 6.5 inch centers |
Special Features | 6-1/2 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 2 Points |
Voltage Rating | 15 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 15.4300 L |
Package Weight (Metric) | 6.9990 kg |

J4-6226-15-L
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, Left Parking Stand.
J5-26662-25
5 Point Junction, with one 200 Amp Bushing Well Interfaces, three 600 Amp Bushing Interfaces and one 200 Amp Bushing Well Interface, 25kV, No Tilt Mounting.
J2-26-25-TMA
Multi-Point Junction, 2 Points, Interface Identification and Positioning - (1) 200 Amp Bushing Well Interface and (1) 600 Amp Bushing Interface, Voltage Class - 25/28kV, Standard Spacing - 4 inch centers, with Tilt Mounting Adapter - Bolts to the bottom of the standard Mounting bracket to provide 15, 30, 45 or 60 degree adjustable angle mounting. (Note - Two Mounting Adapters are rquired for each installation).
J6-226666-15
15kV, 6 Point Multi-Point Junction, 2 x 200 Amp Bushing Well Interfaces, 4 x 600 Amp Bushing Interfaces, Standard Spacing of 4 inch centers. No Tilt Mounting
J4-6226-25-SV
25kV, Multi-Point Junction. 4-Points, 600 Amp Bushing Interface, (2) 300 Amp Bushing Well Interfaces, 600 Amp Bushing Interface. SV - Optional 6-1/2 inch Centers.
J6-6BB226-15-TMA
15kV, Multi-Port Junction, 6 Points, 600 Amp Bushing Interface, 2 x Blank Positions, 2 x 200 Amp Bushing Well Interface and 600 Amp Bushing Interfaces. Voltage Class 15kV, Standard 4 inchCenters Interface Spacing. TMA - Tilt Mounting Adapter. Bolts to the bottom of the standard mounting bracketg to provide 15, 30, 45 or 60 degree adjustable angle mounting.
J2-66-25-R
25kV, Multi-Point Junction. 2-Points, (2) 600 Amp Bushing Interfaces. R - Right Parking Stand.Frequently Asked Questions
What are the bushing interface ratings?
The junction includes one 200 Amp and one 600 Amp bushing interface.
What voltage rating does the J2-26-15-SV support?
The J2-26-15-SV is rated for 15kV systems.
What is the center spacing for mounting?
The center spacing is 6-1/2 inches.
Does this junction require tilt mounting?
No, the J2-26-15-SV does not require tilt mounting.
What applications is this junction suitable for?
It is designed for medium-voltage power distribution in substations, industrial plants, and renewable energy facilities.
How to Install a Deadbreak Junction (Universal Mount)
This guide provides step-by-step instructions for installing a two-, three-, or four-point deadbreak junction, such as the J2-26-15-SV, using the universal mount method. It covers mounting, assembly, grounding, and pre-energization preparation for 15/25/35kV, 600/900 Ampere systems.
Estimated time: 1h 30m
Tools needed:
Wrench set (for 3/8" and 1/2" hex nuts/cap screws), Drill, Marking tool, Wire strippers, Torque wrench
Supplies needed:
Deadbreak Junction (e.g., J2-26-15-SV), Base Bracket, Base Plate, Universal Brackets (4), Mounting Hardware Prepack (includes 3/8" and 1/2" hex hardware), Suitable fasteners (for attaching universal brackets to flat surface), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated cap(s) or connector(s)
- De-energize Apparatus and Prepare Mounting Surface
DANGER: All apparatus must be de-energized during installation or removal of part(s). Ensure the mounting surface is clean, stable, and prepared for installation. Using the base plate as a template, place it on the desired mounting surface and mark all four slot locations for the universal brackets.
- Mount Initial Universal Brackets
Attach two (2) universal brackets to the marked slot locations on the flat surface using suitable fasteners (user-supplied). Tighten these fasteners securely to prevent any movement during operation.
- Attach Remaining Universal Brackets
Connect the remaining two (2) universal brackets to the two brackets already mounted on the surface. Position them at the desired angle and secure them using the supplied 3/8” hex head cap screws, external tooth lock washers, and 3/8” hex nuts. Tighten all hardware securely.
- Assemble Junction to Base Bracket and Base Plate
Assemble the deadbreak junction to the base bracket assembly and base plate. Secure this assembly using two (2) supplied 1/2” hex head cap screws, two (2) 1/2” split lock washers, and two (2) 1/2” hex nuts. Attach these to the center mounting holes on the bracket assembly and tighten securely.
- Mount Junction Assembly to Universal Brackets
Attach the complete deadbreak junction assembly (junction, base bracket, and base plate) to the universal brackets mounted on the surface. Use the supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Tighten all fasteners securely. Verify that the parking stand is in the upright position.
- Ground the Assembly
Ground the base bracket assembly and the junction’s black conductive jacket. Connect a grounding wire (No. 2 solid to 1/0 stranded) to the grounding lug provided on the base bracket. Ensure a secure and reliable ground connection.
- Prepare Operating Interfaces
Remove all protective shipping caps from the junction's operating interfaces and clean them thoroughly. Lubricate each interface with an ELASTIMOLD approved lubricant; do not use substitutes. If any operating interfaces remain unused, install appropriate HV insulated caps before energizing the circuit. Do not use the protective shipping caps for this purpose as they are not insulated.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.