Authorized ABB Distributor (Installation Products)
ABB - Installation Products ATS10 - Autoset Automatic Tension Splice for Wire Range: 1/0 6/1 ASCR, 1/0 AAAC, 1/0 AAC, Aluminum, Color Code 1/0 - Yellow

ABB Installation Products ATS10 Autoset Automatic Tension Splice for Wire Range: 1/0 6/1 ASCR, 1/0 AAAC, 1/0 AAC…

UPC: 783786095643


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB Autoset Automatic Tension Splice (SKU: ATS10) is a precision-engineered splicing solution designed for overhead power lines. This splice accommodates wire ranges from 1/0 to 6/1 ASCR, 1/0 AAAC, and 1/0 AAC conductors, including aluminum variants. The color-coded yellow sleeve ensures easy identification and correct installation for 1/0 gauge wires. Engineered for reliability, the ATS10 provides consistent tension and electrical continuity, reducing installation time and minimizing human error. Ideal for utilities and electrical contractors requiring durable, high-integrity splices in overhead distribution systems. Compatible with standard tensioning tools and compatible with existing line hardware. The splice’s design eliminates the need for complex crimping or bolting, streamlining field operations. Suitable for use in both urban and rural power distribution networks where dependable connections are critical.
  • Automatic tensioning for consistent electrical performance
  • Compatible with 1/0 to 6/1 ASCR, 1/0 AAAC, 1/0 AAC, and aluminum conductors
  • Color-coded yellow sleeve for 1/0 gauge wire identification
  • Eliminates crimping or bolting for faster field installation
  • Designed for overhead power line applications

Specifications

Application
Overhead Tension Connection
Handle Type
None
Overall Length
16.25 in
Special Features
Color Coded. Center Stop
Type
Automatic Tension Splice
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
0.7500 L
Package Weight (Metric)
0.3400 kg
Easy-Splice Gel Tap Splice Kit with Connector for #14 - 2/0 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.

ESGTS-2/0

Easy-Splice Gel Tap Splice Kit with Connector for #14 - 2/0 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.
Plate with Magnets, Four Hole Splice, Length 7-1/4 Inch, Width 1-5/8 Inch, Hole Diameter 9/16 Inch, Steel

ZX207M

Plate with Magnets, Four Hole Splice, Length 7-1/4 Inch, Width 1-5/8 Inch, Hole Diameter 9/16 Inch, Steel
The HD Flex Front Cable Manager is black and fits in a 4 RU footprint.

FLEX-FCM4UA

The HD Flex Front Cable Manager is black and fits in a 4 RU footprint.
Tap Splice, 20 – 18 AWG, .5 – .9 mm² Wire, 642 – 1624 CMA, Brass, Red, 12 mm [.472 in] Length, Bag, Solid / Stranded Wire, Copper Wire, ELECTRO-TAP

171425-1

Tap Splice, 20 – 18 AWG, .5 – .9 mm² Wire, 642 – 1624 CMA, Brass, Red, 12 mm [.472 in] Length, Bag, Solid / Stranded Wire, Copper Wire, ELECTRO-TAP
Autoset Automatic Tension Splice for Wire Range: 1/0 6/1, 2/0 7/1 ASCR, 1/0-2/0 AAAC, 1/0-2/0 AAC, Aluminum, Color Code 1/0 - Yellow, 2/0 - Gray

ATS1020

Autoset Automatic Tension Splice for Wire Range: 1/0 6/1, 2/0 7/1 ASCR, 1/0-2/0 AAAC, 1/0-2/0 AAC, Aluminum, Color Code 1/0 - Yellow, 2/0 - Gray
Autoset Automatic Tension Splice for Wire Range: 266 18/1, 266 26/7, 336 18/1 ASCR, 312.8 AAAC, 266-336 AAC, Aluminum, Color Code Green

ATS266336

Autoset Automatic Tension Splice for Wire Range: 266 18/1, 266 26/7, 336 18/1 ASCR, 312.8 AAAC, 266-336 AAC, Aluminum, Color Code Green
Autoset Automatic Tension Splice for Wire Range: 3/0 6/1, 4/0 6/1 ASCR, 3/0-4/0 AAAC, 3/0-4/0 AAC, Aluminum, Color Code 3/0 - Black, 4/0 - Pink

ATS3040

Autoset Automatic Tension Splice for Wire Range: 3/0 6/1, 4/0 6/1 ASCR, 3/0-4/0 AAAC, 3/0-4/0 AAC, Aluminum, Color Code 3/0 - Black, 4/0 - Pink
Autoset Automatic Tension Splice for Wire Range: 336 26/7, 397 18/1, 397 26/7, 477 18/1 ASCR, 394.5 AAAC, 397-477 AAC, Aluminum, Color Code Blue

ATS397477

Autoset Automatic Tension Splice for Wire Range: 336 26/7, 397 18/1, 397 26/7, 477 18/1 ASCR, 394.5 AAAC, 397-477 AAC, Aluminum, Color Code Blue

Frequently Asked Questions

What is the color code for the ATS10 splice?

The ATS10 splice features a yellow color code for 1/0 gauge wires.

What wire types does the ATS10 support?

The ATS10 supports 1/0 to 6/1 ASCR, 1/0 AAAC, 1/0 AAC, and aluminum conductors.

Is the ATS10 splice reusable?

The ATS10 is designed for permanent installation and is not intended for reuse.

What tools are required to install the ATS10?

Standard tensioning tools compatible with automatic splices are required for installation.

How to Install the ATS Wide Range Automatic Tension Splice

A comprehensive guide for the proper installation of the ATS Wide Range Automatic Tension Splice for ACSR, AAAC, and AAC conductors, ensuring a secure and reliable connection. WARNING: Disconnect power before installation to prevent risk of shock.

Tools needed:

Wire brush

Supplies needed:

ATS Wide Range Automatic Tension Splice, Tape or marking device, Non-gritted oxide-inhibitor, Aluminum conductor cleaner (for ACSR conductors)

  1. Prepare the Conductor

    Select the appropriate ATS wide range automatic tension splice based on wire size and type, which is clearly marked on the splice. Straighten the conductor to remove any curvature. Cut back old conductors sufficiently to remove stretches, burned, or annealed strands, ensuring the cut is square so all strands are even, in lay, and free of burrs. Measure the conductor for full insertion (one half the length of the splice) and mark it with tape or another device. Thoroughly wire brush the end section. For ACSR conductors only, thoroughly clean the portion to be inserted with a good quality aluminum conductor cleaner. Apply a coat of non-gritted oxide-inhibitor, wipe off excess, and then wire brush the inhibitor-coated conductor once again to assure all oxides have been removed and inhibitor reaches between the strands.

  2. Insert the Conductor into the Splice

    Do not remove the plastic strand guide or internal pilot cup from the splice, as these components confine and guide the conductor strands for easy insertion. Insert the prepared conductor into the splice with a smooth, straight, continuous thrust through the jaws until the conductor hits the center stop. Do not twist the conductor during insertion, and avoid pushing partially, pausing, and then continuing. Check the marked insertion distance to confirm the conductor is fully seated; if insertion is not complete, the conductor will not be gripped and will pull out easily.

  3. Set the Splice Jaws

    Before releasing any blocks or tensioning devices, apply a momentary “hand set” tension to the conductor to assure proper jaw gripping within the splice. It is normal for the conductor to move 1/4 inch to 1/2 inch from the end of the splice due to the sliding action of the gripping jaws as tension is applied. Do not tap the splice to set the jaws.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.