ABB Installation Products 776BGADDRK-S 35 kv, 600 Amp, Deadbreak, Ball Grounding Device Kit, includes Grounding Device with 1…
UPC: 075114279154
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 35 kV, 600 Amp continuous rating with 25 kA symmetrical momentary rating (10 cycles)
- Deadbreak design allows safe operation under load without de-energizing circuits
- Removable insulated cap with capacitive test point for non-intrusive voltage verification
- Connects to 600 A series elbow connectors (T-body) for permanent ground connection
- Meets ANSI/IEEE Standard 386 (Latest Revision) with 150 kV BIL impulse withstand
Specifications
Amperage Rating | 600 A |
Application | 35 kV, 600 Amps |
Conductor Material | Copper , EPDM Rubber |
Connection | Push-In |
Connection Type | Deadbreak |
Current Rating | 600 A |
Insulation | EPDM Rubber |
Length | 9.15 in |
Material | EPDM, Silicone, Copper |
Mounting Type | Back interface of 600 A series elbow connectors |
Series | 776 |
Size | 1 inch Ball |
Special Features | Fits 1 Inch Ball, Includes Stud |
Standard | ANSI/IEEE Standard 386 |
Type | Grounding Device Ball Kit |
Voltage Rating | 35 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 8.2600 L |
Package Weight (Metric) | 3.7470 kg |

771BGAD
35 kv, 600 Amp, DeadBreak, Ball Grounding Device, Ground Clamp Connection has 1 inch (25.4mm) Diameter Ball. Length 11.56 inch, Diameter 3 inch.
IGB-WM
Intersystem grounding and bonding bridge for wall mount applications. Accomodates #6 to #2 Ground Electrode Conductors and #14 to #4 bonding conductors (4 each). Includes snap in place plastic cover.
776BGADDR
35 kv, 600 Amp, DeadBreak, Insulated Cap with Test Point, Fits 1 inch Ball Grounding Device
776BGADDRK
35 kv, 600 Amp, Deadbreak, Grounding Ball Device Kit. includes Insulated Cap with Test Point, Grounding Device with 1 inch (25.4mm) Ball
776GADDRK
35 kv, 600 Amp, Deadbreak, Grounding Device Kit. includes Grounding Device with standard C-Clamp ground connection, Insulated Cap with Test PointFrequently Asked Questions
Does the GAD provide a permanent grounding connection?
Yes, the Elastimold GAD provides a permanent, reliable, direct 600 A or 900 A rated ground connection.
What is the Elastimold GAD used for?
The Elastimold GAD provides a permanent, reliable, direct 600 A or 900 A, 25 kA rated ground connection for underground systems when fault currents exceed 10 kA.
What is the short circuit withstand rating?
The Elastimold GAD has a short circuit withstand rating of up to 25 kA. It is designed for 600 A and 900 A applications.
What system classes is the GAD available for?
The Elastimold GAD is available for 15 kV, 25 kV, and 35 kV system classes.
What types of ground clamps are compatible?
The GAD is available for C and ball-stud grounding clamp types. Series GAD and GADDR are for C-clamp, while BGAD and BGADDR are for ball-stud connections.
What current ratings does the GAD support?
The GAD provides a direct 600 A or 900 A rated ground connection. It features full copper construction ideal for these applications.
How is the Elastimold GAD installed?
The Elastimold GAD easily installs in the rear interface of a 600 A series elbow connector (T-body).
Is the GAD hot-stick workable?
Yes, the Elastimold GAD and its associated insulating cap with integral capacitive test point are designed to be hot-stick workable.
What is the Elastimold GAD used for?
The Elastimold GAD provides a permanent, reliable, direct 600 A or 900 A, 25 kA rated ground connection for underground systems when fault currents exceed 10 kA.
What is the short circuit withstand rating?
The Elastimold GAD has a short circuit withstand rating of up to 25 kA. It is designed for 600 A and 900 A applications.
How to Install the LINK-C Deadbreak Cam Link Operable Connector System
This guide provides step-by-step instructions for installing the LINK-C 600 amp deadbreak cam link operable connector system, including mounting, wiring, and connecting components. Ensure all safety precautions are followed.
Estimated time: 2h
Tools needed:
Torque wrench, Wrench or socket for 1 inch hex, Hot stick, Wire strippers, Welding equipment (if applicable)
Supplies needed:
ELASTIMOLD lubricant, 600 amp elbow, Hex nuts (3/8-16), Lockwashers (3/8-16), Mounting studs (3/8-16 x 2") (if applicable), Alignment bracket hardware, #14 or #12 AWG copper wire, Grounding connectors, Mating 200 amp product
- De-energize Apparatus and Prepare
DANGER: Ensure all apparatus is completely de-energized before beginning any installation or removal procedures. Read all instructions thoroughly, check package contents for completeness, and have all required tools and supplies ready. Maintain cleanliness throughout the process.
- Install 600 Amp Elbow
Install the 600 amp elbow onto the cable following its specific installation instructions. Ensure it is positioned to align with the stand-off plug.
- Install Mounted Stand-Off Plug (If Applicable)
If using a mounted stand-off plug, weld three 3/8-16 x 2” studs to the faceplate according to customer standards and dimensions. Install three hex nuts onto the studs to support the stand-off plug in-line with the bushing. Place the stand-off plug over the studs, resting on the nuts or spacers. Secure with three lockwashers and hex nuts, tightening to 12 ft-lbs torque. Ensure the top surfaces of the bushing and stand-off plug are in-line.
- Install Bushing Extender and Elbow
Clean and thoroughly lubricate the apparatus bushing and both interfaces of the 600 amp bushing extender with ELASTIMOLD lubricant. Install the bushing extender onto the apparatus bushing. Insert the 600ATM into the retainer contact, engage the internal hex broach, and thread the retainer contact into the apparatus bushing using a suitable tool on the 1” hex portion of the 600ATM, torquing to 50-60 ft-lbs. Clean and lubricate the epoxy standoff plug and both interfaces of the 600 amp elbow. Install the elbow onto the epoxy standoff plug. Insert the 600ATM into the retainer contact, engage the internal hex broach, and thread the retainer contact into the epoxy standoff plug through the compression lug hole, torquing to 50-60 ft-lbs.
- Position and Secure Alignment Bracket
Remove the bushing extender clamp and elbow clamp from the alignment bracket. Position the alignment bracket on the bushing extender 2.5 inches (63.5mm) from the grounding eye. Assemble the bushing extender clamp to the alignment bracket with the supplied hardware, torquing by alternating sides until the clamp tabs are flush and tight.
- Align and Secure Elbow
Position the elbow within the alignment bracket so that the elbow cuff aligns evenly with the bushing extender cuff. Assemble the elbow clamp to the alignment bracket using the supplied hardware, torquing by alternating sides until the clamp tabs are flush and tight. Ensure the elbow clamp notch faces the cable entrance of the elbow.
- Insert and Engage the Link
Clean and thoroughly lubricate both 600 ampere interfaces of the Link with ELASTIMOLD lubricant. Align the Link to be perpendicular to the switch faceplate when inserted into the bushing extender and elbow. Insert the Link, ensuring both lever arms are inside the alignment bracket legs. Engage the pivot pin into the slots of the alignment bracket legs. While pushing inward, move the lever arms downward using a hot stick eye to engage the roller pin and move the Link inward. Continue until the lever arms are perpendicular to the alignment bracket leg.
- Ground Components and Install Mating Product
Ground the elbow by feeding a #14 AWG or #12 AWG solid copper wire through its grounding eye, twisting it tight, and connecting it to ground. Clean and lubricate the 200 amp interface on the Link. Ground and then install the desired mating product onto the 200 amp interface according to its specific installation instructions. Ground the cable: if using concentric neutral cable, twist the neutral wires together and connect to ground; if using 20MA or 21MA grounding devices, connect their ground lead to ground. For three-phase installations, tie all grounds from all three phases to a common ground point.
- Refer to Operating Instructions
For operation of the Link and 200 ampere mating products, consult their respective applicable operating instructions.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.



