
ABB Installation Products 750ETP 35kV 600 Series Deadbreak, Loadbreak Elbow Tap Plug
UPC: 783786646524
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 35kV Tap, 200 Amp Loadbreak Rated Elbow Tap Plug
- Enables 200A tap off a mating 600A connector
- Designed for energized operation in single-phase applications
- Includes hex-broach for precise installation torque
- Peroxide-cured insulation and jacket for durability
Specifications
Application | 35kV, 600 Amps |
Connection Type | Elbow Tap Plug |
Current Rating | 200 A |
Material | EPDM-Rubber |
Material | Peroxide-cured EPDM |
Mounting Type | Factory-assembled or loose stud |
Poles | 1P |
Series | 600 Series |
Size | Length 9.86 inch, Diameter 3 inch |
Size | 600/200A |
Temperature Rating, Maximum | 194 F |
Temperature Rating, Maximum | 90 C |
Temperature Rating, Minimum | 194 F |
Temperature Rating, Minimum | 90 C |
Type | Deadbreak/Loadbreak Elbow Tap Plug |
Voltage Rating | 35 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 2.1000 L |
Package Weight (Metric) | 0.9530 kg |

150-TB-2
15/25kV, T-Splice 6-3/4 inch Long Bail Assembly, Made of Stainless Steel, Used for Assisting Cable to Transformer Connections. Non-Current Carrying. The 150TB2 bailing assembly kit consists of a modified hold down bail for securing Elastimold® tee splice K150T to a K150DP Deadbreak insulating plug. This assembly provides positive hold down force between the tee splice and the insulating plug.
750SA
35kV, 600 Amp Series, Deadbreak Elbow Threaded Stud. Aluminum. Length 2.28 inch. Threaded Length each end .84 inch.
650WINDOW-OK
Window-op, Operating Kit, Contains Grounding Elbow Package, Test Rod Assembly, Lubricant, Instruction Sheets. Tool Bag.
650LT-B
15kV LINK-OP LoadBreak, Reducing Tap Plug. 600AT assembly tool required for operation and/or installation of Link-Op. 600ATM is recommended for installing Link-Op/Cam-Op retaining sleeves.
K650LT-B
25kv LRTP-link, current carrying, Rubber, Aluminum, Copper, Plastic. 25kV LINK-OP LoadBreak, Reducing Tap Plug. 600AT assembly tool required for operation and/or installation of Link-Op. 600ATM is recommended for installing Link-Op/Cam-Op retaining sleeves.Frequently Asked Questions
What is the voltage rating of the 750ETP?
The ABB 750ETP has a voltage rating of 35kV.
What type of connection does the 750ETP provide?
The 750ETP provides deadbreak and loadbreak elbow tap connections.
Who is the manufacturer of the 750ETP?
The manufacturer of the 750ETP is ABB - Installation Products.
How to Install the 750/775 ETP Elbow Tap Plug
This guide provides step-by-step instructions for the safe and proper installation of the 750/775 ETP Elbow Tap Plug, including cable preparation, assembly, and grounding procedures for high-voltage applications.
Estimated time: 1h 30m
Tools needed:
Torque wrench, Crimping tool, Wire strippers
Supplies needed:
750/775 ETP Tap Plug, ELASTIMOLD approved lubricant, Double-ended stud (if applicable), Elbow connector, Spade contact, #14AWG copper wire (or equivalent), Appropriate grounding connector, Jumper (for metallic tape shield, equivalent ampacity), Waterproofing material, DR(G), ESA, GLR, or LR (optional components)
- Prepare for Installation and Safety Check
De-energize all apparatus before beginning installation or removal of any parts. Inspect all components for damage, proper rating, and compatibility with mating parts. Ensure the installation is performed by competent personnel trained in high voltage electrical equipment safety practices. Remove any protective shipping covers and replace with appropriate HV insulated caps or connectors before energizing or submerging the circuit. Verify all package contents are complete and undamaged, and components fit correctly with the cable and mating products. Have all required tools ready and maintain cleanliness throughout the procedure.
- Prepare Cable and Install Elbow
Prepare the cable according to the (K)650LR or 750LR installation instructions, including the spade contact. Before crimping the spade contact, align it on the cable so it lies flat on the apparatus bushing contact. Install the elbow onto the prepared cable.
- Prepare Tap Plug and Lubricate Interfaces
Remove protective caps from both the elbow connector and the tap plug. If applicable, finger tighten the double-ended stud into the tap plug. Thoroughly clean and lubricate the entire mating connector interface, elbow connector interfaces, and the tap plug using the supplied lubricant or an ELASTIMOLD approved lubricant.
- Assemble and Torque the Tap Plug
Assemble the elbow connector onto the mating connector. Insert the tap plug into the elbow connector. Insert the drive adapter into the tap plug. Rotate the drive adapter clockwise while simultaneously pushing the elbow and tap plug towards the mating connector. Continue rotating the drive adapter clockwise with an appropriate tool until a torque of 50-60 ft-lbs is reached. Remove the drive adapter from the tap plug.
- Install Grounding Eye Wire
Insert one end of a #14AWG copper wire (or equivalent) through the grounding eye of the elbow. Leave sufficient length to allow for potential movement of the elbow. Form a small loop and twist it tightly, being careful not to damage the grounding eye.
- Connect Concentric Wire Shield to Ground
For concentric wire shielded cable, twist the shield wires together. Connect these twisted shield wires and the grounding eye wire to a common ground point using an appropriate connector. Ensure sufficient length is left for elbow movement. For three-phase installations, tie all grounds from all three phases to this common ground point. If the cable is jacketed, install appropriate waterproofing at the jacket terminus to prevent moisture ingress.
- Connect Metallic Tape Shield to Ground
For metallic tape shielded cable, connect the metallic shield of the cable to ground using a jumper with ampacity equivalent to the metallic shield. Install appropriate waterproofing at the jacket terminus to prevent moisture ingress. Connect the elbow connector grounding eye wire to ground.
- Install Optional Components
Clean and lubricate the entire tap plug interface. Install either a DR(G), ESA, GLR, or LR of the appropriate voltage class onto the tap plug interface, following the specific instructions provided with that product. Use the supplied lubricant or an ELASTIMOLD approved lubricant.
- Verify Final Seating
Confirm the complete assembly of any insulated cap or elbow by ensuring no portion of the black band is visible when viewed from the side.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.

