Contact for Pricing
Overview
- 200 Amp current rating
- 15/25kV voltage class
- Deadbreak elbow cable entrance insulating plug
- Accommodates cable insulation diameter: 1.040" - 1.175"
- 9.25 inches long, constructed of plastic
Specifications
Application | Holds Elbow in Place and Seals Cable Entrances |
Connection | Threaded |
Connection Type | Deadbreak Elbow Cable Entrance |
Current Rating | 200 A |
Material | Plastic |
Series | 10EP |
Size | Cable Insulation Diameter 1.040 inch to 1.175 inch |
Size | 1.040 to 1.175 inch |
Special Features | Non-Electrical. Fake Probe |
Type | Plastic Insulating Plug |
Voltage Rating | 15/25 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.0010 L |
Package Weight (Metric) | 0.0010 kg |
K675TBC
15/25kV, 900 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Boot and Collar.
00700270
Universal Aluminum Rod Contact for Aluminum or Copper Conductors for use with PCT (Power Cable Terminations), 15/25kv, for Conductor size 4/0 - Stranded/Compressed, 250 Compact/Solid
16THG-FB-0220-4
Gray, Single Piece Terminator (Class 1) includes Contract Rod, Ground Strap and Rain Cap. 15/25kv, Cable Insulation Diameter .675 to .785 inches, Conductor size - #2 Stranded/Compressed or #1 Compact/Solid.16THG-GB-1240-4
Gray, Single Piece Terminator (Class 1) includes Contract Rod, Ground Strap and Rain Cap. 15/25kv, Cable Insulation Diameter .875 to .985 inches, Conductor size - 1/0 Stranded/Compressed or 2/0 Compact/Solid. For Aluminum Only10EP-GB
15-35kV 200 Amp, Loadbreak Elbow Cable Entrance Insulating Plug, Cable Insulation Diameter 0.875 inch to 0.985 inch. 9.25 inches Long. Plastic.
00700240
Universal Aluminum Rod Contact for Aluminum or Copper Conductors for use with PCT (Power Cable Terminations), 15/25kv, for Conductor size 1/0 - Stranded/Compressed, 2/0 Compact/Solid10EP-GAB
200 Amp, 15/25kV, Deadbreak Elbow Cable Entrance Insulating Plug, Cable Insulation Diameter 0.825 inch to 0.935 inch. 9.25 inches Long. Plastic.Frequently Asked Questions
What is the 10EP insulating plug used for?
The 10EP insulating plug electrically insulates and water seals cable entrances of Elastimold® 200 Amp elbow connectors. It creates an electrically and mechanically sound dead-end cable entrance.
What is the ordering number for the 10EP?
To order, specify the number 10EP-W.
Which elbow cable entrance sizes are available for the 10EP?
The 10EP is available for Elastimold® elbow cable entrance sizes EB, EF, FA, FAB, FB, FG, GA, GAB, and GB.
What items are included in the 10EP kit?
Each kit contains one Insulated Plug 10EP, one Crimp Chart IS-0169, and one Lubricant 82-08.
Which elbow cable entrance sizes are available for the 10EP?
The 10EP is available for Elastimold® elbow cable entrance sizes EB, EF, FA, FAB, FB, FG, GA, GAB, and GB.
What is the ordering number for the 10EP?
To order, specify the number 10EP-W.
What is the 10EP insulating plug used for?
The 10EP insulating plug electrically insulates and water seals cable entrances of Elastimold® 200 Amp elbow connectors. It creates an electrically and mechanically sound dead-end cable entrance.
What items are included in the 10EP kit?
Each kit contains one Insulated Plug 10EP, one Crimp Chart IS-0169, and one Lubricant 82-08.
What is the purpose of the 10EP's threaded hole?
The 10EP has a threaded hole to simulate the conductor contact, allowing the elbow's male contact to be installed.
How does the 10EP function as a dead-end receptacle?
The 10EP enables an elbow connector to function as a dead-end receptacle for any mating bushing interface. This eliminates the need for a normal dead-end receptacle.
How to Install the 10EP Elbow Cable Entrance Insulating Plug
This guide provides instructions for installing the 10EP Elbow Cable Entrance Insulating Plug onto an Elastimold 200amp Deadbreak or Loadbreak elbow. The installed plug acts as an insulated cap for terminating an exposed interface and includes a test point for verifying circuit status.
Estimated time: 20m
Tools needed:
Pliers, Wrench
Supplies needed:
10EP Elbow Cable Entrance Insulating Plug, Lubricant (supplied or ELASTIMOLD approved), Male contact, Protective cap (for male contact), No. 14 AWG (2.5mm2) copper wire
- Prepare for Installation and Ensure Safety
Ensure all apparatus is de-energized before beginning installation. Inspect all parts for damage, proper rating, and compatibility with mating components. Verify that all package contents are complete and undamaged, and that all components fit properly with the cable and/or mating products. Have all required tools ready and maintain cleanliness throughout the procedure.
- Lubricate the Insulating Plug
Lightly lubricate the surface of the insulating plug with the supplied lubricant or an ELASTIMOLD approved lubricant. Apply lubricant for approximately 4-1/2 inches from the second chamfered step. Do not substitute lubricants, as other types may be harmful to this product or its mating parts.
- Insert the Insulating Plug into the Elbow
Position the insulating plug so its flat contact area faces the receptacle end of the elbow connector. Slide the 10EP into the elbow connector until it cannot advance any further. Look into the receptacle end of the elbow to confirm that the threaded hole in the 10EP is properly aligned to accept the male contact. If misalignment occurs, use pliers on the exposed end of the 10EP to rotate it into the correct position.
- Install the Male Contact
Remove the protective cap from the threads of the male contact. Insert the threaded end of the male contact into the threaded hole of the insulating plug, which is located in the receptacle end of the elbow. Hand tighten this contact. Snug tighten only to avoid stripping threads; do not overtighten, and avoid bending the wrench as indicated in the elbow connector instructions.
- Complete Assembly and Ground the Elbow
Lightly lubricate both the bushing and elbow connector mating surfaces. Complete the final assembly as specified in the instructions for the elbow. Ground the elbow by connecting a piece of wire equivalent to No. 14 AWG (2.5mm2) copper from the apparatus ground to the elbow grounding eye.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.