ABB Installation Products 10-TL-PA Tape and Lead - Shield Adapter, Cable Accessory, Insulation 1.755 to 1.875 inches
UPC: 783786662746
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Accommodates insulation diameters from 1.755 to 1.875 inches
- Designed for shielded cable terminations (copper tape, concentric neutral)
- Prevents electromagnetic and radio frequency interference
- Part of ABB Installation Products catalog for industrial applications
- Ensures reliable shielding continuity in harsh environments
Specifications
Application | Used to Mate and Install the Cable to an Elastimold Product |
Connection | Slide-On |
Connection Type | Shielded cable termination |
Material | EPDM-Rubber |
Size | Cable Insulation Diameter 1.755 to 1.875 inches |
Size | 1.755 to 1.875 inches |
Size | 1.755-1.875 inch insulation diameter |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Shield Adapter |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.1500 L |
Package Weight (Metric) | 0.0680 kg |
K675TBC
15/25kV, 900 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Boot and Collar.
655CA-G
15/25kV, 600 Amps, Deadbreak Cable Size Adapter. Cable Insulation Diameter 0.760 inch to 0.950 inch. Length 6.38 inch, Diameter 2.14 inch.755CA-G
35kV 600 Series Deadbreak Cable Size Adapter, Cable Insulation Diameter 0.760 inch to 0.950 inch.755CA-Q
35kV 600 Series Deadbreak Cable Size Adapter, Cable Insulation Diameter 1.900 inch to 2.120 inch.655CA-M
15/25kV, 600 Amps, Deadbreak Cable Size Adapter. Cable Insulation Diameter 1.370 inch to 1.630 inch. Length 6.38 inch, Diameter 2.14 inch.Frequently Asked Questions
Can you provide an example of a 10TL-W ordering number?
For a Unishield cable with an insulation diameter of 0.865 inches to 0.950 inches, the ordering number is 10TL-GB.
What is the general insulation diameter range for 'GB' W code?
The 'GB' W code in the table corresponds to a cable insulation diameter range of 0.875 to 0.985 inches (22.2 to 25.0 mm).
How do I find the correct 'W code' for my cable?
Locate your cable's insulation diameter in inches or millimeters within the provided table. The corresponding symbol in the 'Symbol for W' column is your 'W code'.
How is the 10TL-W adapter part number determined?
The 'W' letter code in the 10TL-W part number is determined by the insulation diameter of the Unishield cable. Refer to the provided table for the correct 'W code'.
What is the 10TL-W product?
The 10TL-W is a 15kV Unishield Cable adapter. The 'W' in the part number is a letter code determined by the cable's insulation diameter.
How do I find the correct 'W code' for my cable?
Locate your cable's insulation diameter in inches or millimeters within the provided table. The corresponding symbol in the 'Symbol for W' column is your 'W code'.
Can you provide an example of a 10TL-W ordering number?
For a Unishield cable with an insulation diameter of 0.865 inches to 0.950 inches, the ordering number is 10TL-GB.
What is the general insulation diameter range for 'GB' W code?
The 'GB' W code in the table corresponds to a cable insulation diameter range of 0.875 to 0.985 inches (22.2 to 25.0 mm).
How is the 10TL-W adapter part number determined?
The 'W' letter code in the 10TL-W part number is determined by the insulation diameter of the Unishield cable. Refer to the provided table for the correct 'W code'.
What is the 10TL-W product?
The 10TL-W is a 15kV Unishield Cable adapter. The 'W' in the part number is a letter code determined by the cable's insulation diameter.
How to Install the 10TL Adapter for Flat Metallic Tape Shielded Cable
This guide provides step-by-step instructions for installing the 10TL adapter on flat metallic tape shielded cables with tape insulation shields, ensuring proper preparation and connection with Elastimold distribution products. All apparatus must be de-energized during installation or removal of parts. This product should be installed only by competent personnel trained in good safety practices involving high voltage electrical equipment.
Estimated time: 1h
Tools needed:
Knife, Soldering Iron, Wire Strippers, Rag
Supplies needed:
10TL Adapter housing, Lubricant (DO NOT SUBSTITUTE), PVC Insulating Electrical Tape (3/4" wide), Vinyl Plastic Electrical Tape, Approved Safety Solvent, #14 AWG (2.08mm²) Wire, Grounding Lead, Electrical Insulating Tape
- Prepare Cable Outer Jacket
De-energize all apparatus before beginning. Refer to the Elastimold product instructions for the semiconductive shield removal dimension. Remove the cable's outer jacket to a length 2 inches (51mm) greater than this specified dimension.
- Remove Metallic Tape Shield
Carefully remove the metallic tape shield, ensuring it is cut back to a point 3/4 inch (19mm) from the newly cut edge of the outer jacket.
- Remove Semiconducting Tape Shield
Remove the semiconducting tape shield, cutting it back to a point 1 inch (25mm) from the edge of the outer jacket. Ensure the insulation remains undamaged.
- Apply Tape Retainer and Marker
Wrap 1-1/2 to 2 turns of 3/4 inch (19mm) wide PVC insulating electrical tape over both the semiconducting and metallic tapes, 1/2 inch (13mm) from the outer jacket edge, to create a tape retainer. Then, wrap 2 turns of vinyl plastic electrical tape over the outer jacket, 1 inch (25mm) from its edge, to create a tape marker.
- Clean and Lubricate Cable and Adapter
Clean the outer jacket and thoroughly clean the cable insulation using a rag soaked with an approved safety solvent, wiping from the cable end towards the outer jacket to remove all semiconducting residue. Lubricate the prepared cable section and the inside of the 10TL adapter with the supplied lubricant. DO NOT SUBSTITUTE LUBRICANT.
- Install 10TL Adapter
Slide the 10TL adapter onto the cable using a forward side-to-side twisting motion. Continue until the adapter is flush with the tape marker applied in Step 4. The adapter's step will serve as a marker for subsequent Elastimold product assembly.
- Install Elastimold Distribution Product
Install the associated Elastimold distribution product by following its specific installation instructions. After installation, verify that the gap between the Elastimold product and the step on the 10TL adapter does not exceed 1/8 inch (3mm).
- Remove Tape Marker
Carefully remove the tape marker from the cable after the Elastimold product has been fully assembled.
- Ground the Metallic Shielding Tape
Approximately 2 inches (51mm) back from the end of the adapter, remove 1-1/2 inches (38mm) of the outer jacket. Using #14 AWG (2.08mm²) wire and a grounding lead, fasten the grounding lead to the metallic shielding tape by wrapping the #14 AWG wire several times. Solder the ground lead securely to the metallic tape, taking care to avoid excessive heat that could damage the cable. After soldering, wrap the soldered area with electrical insulating tape, overlapping each cable jacket by approximately 1-1/2 inches (38mm). WARNING: UNGROUNDED SHIELDS ARE DANGEROUS.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.