U-Type Compression Die - Blue 6 AWG Copper - 8 AWG Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.

Flexible Sleeve .291 Id, 50 Per Pack

POLARIS 750 Multi-Tap Black Insulated Connector with 4 Conductors and One Side Wire Entry. Rated for 750-250 MCM, 90 degree C and 600V.

NSI's NO/NC SPDT Magnetic Reed Switch is a Single-Pole, Double-Throw switch. It draws no power while in the closed position, but when the magnet is applied, the common reed swings from the normally closed state to the normally open contact. When the magnet is removed, the reed contact moves back to the normally closed contact.

The Polaris IPLD500-6 Multi-Tap Dual-Sided Entry Connector features 6 ports sized for 500 MCM - 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

The Polaris ISR-1/0 Multi-Tap In-Line Entry Connector features 2 ports sized for 1/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

The Polaris ISR-250 Multi-Tap In-Line Entry Connector features 2 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Non Metallic Splice Kit 12-14 AWG for 2 Conductors with Ground Non Metallic Splice Kits are used for splicing 12 or 14 AWG solid conductor, 2-conductor cable with ground. Hinged cover makes termination fast and easy. Approved for use in a variety of applications including: residential branch circuits, manufactured housing and pre-fabricated building structures.

NSI GLC-12RDB Heavy Duty Direct Burial Ground Clamps grip on pipes between 1/2" to 1" in diameter and are the ultimate ground clamps for securing just about any size ground wire in just about any application. The bronze body and pre-assembled 304 stainless steel screws are made of economical, high-quality metals that provide durable performance in a range of applications. The lay-in lug design of these clamps provides ultimate flexibility when securing large conductors and can accommodate wires in the range of 10 to 2 STR running in a perpendicular direction to the pipe or rod. Use this heavy-duty ground clamp to secure ground wire to copper water pipes, tubing, rebar and ground rods up to 1" in diameter. UL Listed for direct burial in both earth and concrete. UL Listed 467 for grounding and bonding. Stock products you can rely on—stock NSI.

The NSI GRC-3834 Heavy Duty Silicon Bronze Range Taking Rod Clamp is the ultimate solution for flexible grounding to ground rods and rebar in direct burial applications. The heavy-duty silicon bronze construction enables the rod clamp to handle large ground wires up to 1/0 AWG. The special design of this clamp makes it compatible with 3/8", 1/2", 5/8" and 3/4" rebar and ground rods. Available with silicon bronze screws by adding suffix –SB, the GRC-3834 offers durable performance in tough environments. Ground rod clamp is UL Listed for direct burial in both earth and concrete. Stock products you can rely on—stock NSI.

Tefzel Cable Ties, 7.50", 50Lb Min Min. Tensile STRength, UL 94V-O Approved, Plenum Rated, 100

Easy-Splice Direct Burial Roll-On Splice Sleeve for 250 - 600 MCM Easy "roll-on" way to insulate and seal cable connections up to 1,000 volts. The gripping force of the EPDM elastomer combines with high performance sealant to form a water resistant, UV resistant insulating sleeve appropriate for direct burial application over in-line compression connectors. Ideal for use where gas or electric heating devices are not approved. RUS accepted as a secondary tap or splice cover. Each kit includes one Easy-Splice sleeve and sealant strips. Qualified to ANSI C119.1-1986. CSA certified to C22.2 No. 198.2. UL 486D listed, suitable for direct burial. APPLICATION: For use on standard poly or elastomeric-insulated cables. Insulates and seals in-line compression connectors or terminal lugs. Cable can be energized immediately.