Showing 8629-8640 of 461,540 results

NSI Industries · Polaris · Copper Compression
L8N-14P
2 Hole Long Barrel Copper Compression Lug with Peep Hole 8 AWG - 1/4" Bolt - 1" Mounting Spacing Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .
Contact for Pricing

Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

NSI Industries · NSI · Miniterms
S16-8-P
16-14 AWG Uninsulated Spade Terminal #8 Stud - 100 Count Uninsulated spade terminals have an open tongue end for rapid insertion on the mounting screw. Typically used on free-standing studs. Uninsulated spade terminals are made of electro tin-plated copper. 600V, 105 degrees C. FEATURES: STYLE: Uninsulated Spade MATERIAL: Tin-plated copper QUANTITY: 100 Count WIRE SIZE: 16-14 AWG STUD SIZE: 8 LENGTH: 1.000 WIDTH: 0.492
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

Contact for Pricing

NSI Industries · Polaris · Polaris EDGE
ISPB600-3
The Polaris ISPB600-3 Multi-Tap Direct Burial Single-Sided Entry Connector features 3 ports sized for 600 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

NSI Industries · NSI · Miniterms
R22-14N-BULK
22-18 AWG Nylon Insulated Ring 1/4" Stud, 1,000 Per Pack
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

NSI Industries · NSI
8180-HS
8" UV Black Heat Stabilized Cable Ties are formulated for high temperature situations, such as automotive applications and are engineered for superior performance. 18lb Tensile Strength-100 Count Pack.
Contact for Pricing

Contact for Pricing

Contact for Pricing

Contact for Pricing