The NSI GRC-3834 Heavy Duty Silicon Bronze Range Taking Rod Clamp is the ultimate solution for flexible grounding to ground rods and rebar in direct burial applications. The heavy-duty silicon bronze construction enables the rod clamp to handle large ground wires up to 1/0 AWG. The special design of this clamp makes it compatible with 3/8", 1/2", 5/8" and 3/4" rebar and ground rods. Available with silicon bronze screws by adding suffix –SB, the GRC-3834 offers durable performance in tough environments. Ground rod clamp is UL Listed for direct burial in both earth and concrete. Stock products you can rely on—stock NSI.

Easy-Splice Direct Burial Roll-On Splice Sleeve for 8 to 2/0 AWG is an easy "roll-on" way to insulate and seal cable connections up to 1,000 volts. Each kit includes one Easy-Splice sleeve and sealant strips. For use on standard poly or elastomeric-insulated cables. Insulates and seals in-line compression connectors or terminal lugs. Cable can be energized immediately.

Saddle Tie Mount Black .236" hole 100

The Polaris IPLD600-12 Multi-Tap Dual-Sided Entry Connector features 12 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

6 Minute Cycle Timer 20A 120V SPDT Indoor Metal Enclosure

The TORK C460M 60-Minute Spring-Wound In-Wall Twist Timer with a commercial-style metal faceplate is designed to control a variety of indoor appliances, motors and lights. Automate factories, offices or other buildings to save energy and money using the simple twist knob and reliable mechanical timekeeping. Fits into a standard electrical box for in-wall mounting. Designed for DPST switch type on indoor loads such as ventilation fans, lighting, HVAC systems, motors, pumps or air compressors.

The TORK DG180A 24-Hour/7-Day Multipurpose Digital Timer is designed for 20 amp / 120-277 volt loads and has a plastic enclosure for indoor/outdoor use. Automate your home or office to save energy and money, using the intuitive programming interface to set different on/off times each day or to cycle loads on various days. Designed for commercial applications in the home, office, factory, church or school, including indoor/outdoor lighting, heaters, air conditioners, water heaters, warning signs or traffic lights

Light Duty Bell 16VAC 6VDC Max 2 1/2"

The TORK DGS100A 7-Day Holiday and Signal Cycle Digital Timer is designed for 20 amp / 120-277 volt loads and has a plastic enclosure for indoor/outdoor use. Automate your home or office to save energy and money, using the intuitive programming interface to set up to 56 different on/off times each day of the week. Designed for applications in the home, office, factory, church or school, including indoor/outdoor lighting, heaters, air conditioners, water heaters, warning signs or traffic lights

The Polaris ISPB350-3 Multi-Tap Direct Burial Single-Sided Entry Connector features 3 ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and is designed for use in a wide range of temporary submersed or burial splicing applications.

Conduit Adapter Mounting for COS Series

2 Hole Long Barrel Peep Hole Copper Compression Lug with Peep Hole 2/0 AWG - 1/4" Bolt - 5/8" Mounting Spacing Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.