Manual 35" Cable Cutter - 1000 MCM APPLICATIONS: Rugged and lightweight manual cable cutter for use with fiberglass. FEATURES: LENGTH: 32" WEIGHT: 9 pounds CABLE CAPACITY: 1000 MCM FOR USE WITH: Fiberglass MAX INSULATION DIAMETER: 1.90 REPLACEMENT BLADES: Part # CCM-1000RB (Sold Separately)

The Polaris IPLD750-3 Multi-Tap Dual-Sided Entry Connector features 3 ports sized for 750 - 250 MCM wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Amber Press In Indicator Light Stainless Bezel High quality indicator lights are made of nylon with polycarbonate lens material and neon lamps. 125-Volt rated. Connection with 6 inch wire leads.

The Polaris ISR-350B Multi-Tap In-Line Entry Connector features 2 ports sized for 350 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Easy-Splice Direct Burial Roll-On Splice Sleeve for 8 to 2/0 AWG is an easy "roll-on" way to insulate and seal cable connections up to 1,000 volts. Each kit includes one Easy-Splice sleeve and sealant strips. For use on standard poly or elastomeric-insulated cables. Insulates and seals in-line compression connectors or terminal lugs. Cable can be energized immediately.

Saddle Tie Mount Black .236" hole 100

Heavy Duty 6" Diameter Steel Bell with cast aluminum housing in 24V for Indoor or Outdoor use. Painted with Dawn Mist color and rated for #12-22 AWG. High sound output and ideal for schools or hospitals.

The TORK C460M 60-Minute Spring-Wound In-Wall Twist Timer with a commercial-style metal faceplate is designed to control a variety of indoor appliances, motors and lights. Automate factories, offices or other buildings to save energy and money using the simple twist knob and reliable mechanical timekeeping. Fits into a standard electrical box for in-wall mounting. Designed for DPST switch type on indoor loads such as ventilation fans, lighting, HVAC systems, motors, pumps or air compressors.

The TORK DGS100A 7-Day Holiday and Signal Cycle Digital Timer is designed for 20 amp / 120-277 volt loads and has a plastic enclosure for indoor/outdoor use. Automate your home or office to save energy and money, using the intuitive programming interface to set up to 56 different on/off times each day of the week. Designed for applications in the home, office, factory, church or school, including indoor/outdoor lighting, heaters, air conditioners, water heaters, warning signs or traffic lights

We built the NSI GRC-58-SB Standard Duty Silicon Bronze Grounding Rod Clamp for demanding applications including direct burial, where the simple mechanical design and reliable clamping power of the screw outperform other options. The GRC-58-SB Grounding Rod Clamp fits over 5/8" grounding rod and 1/2" rebar with room to tighten the clamping screw onto a range of 10 AWG solid to 2 AWG stranded conductors. GRC-family clamps with the -SB suffix have a body and screw made from silicon bronze for maximum strength, and the clamp is UL-listed for direct burial in earth or concrete. Stock products you can rely on—stock NSI.

The NSI G-2-SDB-SB Heavy Duty Bronze Ground Clamp for Direct Burial grips on pipes between 1-1/4" to 2" in diameter and is suitable for direct burial applications. Ground clamps ending with suffix -SB come with silicon bronze screws and a cast bronze clamp body. These economical, high-quality metals provide durable performance in a range of applications and an extended life over stainless-steel components. UL Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.

12-10 AWG Vinyl Insulated Butt Splice Connectors - 30 Count Vinyl Butt Splice Connectors are made of insulating vinyl. Stripped wires are inserted from each end and "butt" in the center. A crimp at each end secures the connection. Electro tin plated copper, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Butt Splice Connector MATERIAL: Vinyl QUANTITY: 30 Count WIRE SIZE: 12-10 LENGTH: 1.004