The NSI G-6 Heavy Duty Bronze Ground Clamp for Rigid Conduit, grips on pipes between 1-1/4" to 2" in diameter and features a 1/2" adapter hub that swings 360 degrees to make alignment simple. Heavy duty bronze adapters have serrations that match the serrations of the ground clamp, assuring a positive lock. The zinc-plated steel screws and bronze clamp body are made of economical, high-quality metals that provide durable performance in a range of applications. Use this interchangeable clamp to attach rigid conduit and ground conductors to water pipes in indoor environments. cULus Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.

The NSI Bronze Ground Clamp for Water Pipe grips on water pipes between 1/2" to 1" in diameter for quick and easy assembly. The zinc-plated steel screws and cast bronze clamp body are made of economical, high-quality metals that provide durable performance in a range of applications. Use this clamp to easily bond bare copper wire to a water pipe or for use as a water meter shunt. cULus Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.

The NSI G-83 Ground Clamp for Rigid Conduit with Flexible Wire Strap, grips on pipes between 1/2" to 1" in diameter and features a 1" adapter hub connected to the clamp by a flexible copper strap. The wire strap and adapter both swing 360 degrees, making alignment simple. The copper strap provides additional flexibility during grounding and helps to protect the conduit system from results of vibrations in the water system. The zinc-plated steel screws and bronze clamp body are made of economical, high-quality metals that provide durable performance in a range of applications. Use this clamp to attach ground wires from rigid conduit to water pipes in indoor environments. UL Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.

We built the NSI GRC-34 Standard Duty Silicon Bronze Grounding Rod Clamp for demanding applications including direct burial, where the simple mechanical design and reliable clamping power of the screw outperform other options. The GRC-34 Grounding Rod Clamp fits grounding rod with a diameter of 3/4" and rebar with a diameter of 5/8" with room to tighten the clamping screw onto a range of 10 AWG solid to 1 AWG stranded conductors. GRC-family clamps with the -SB suffix have a body and screw made from silicon bronze for maximum strength, and the clamp is UL-listed for direct burial in earth or concrete. Stock products you can rely on—stock NSI.

Easy-Splice Heavy Wall Heat Shrink Kit Kits have been carefully constructed to include the four most common sizes of heavy wall heat shrink 6" lengths. Sealant included. The cases are made of extremely durable polypropylene and have heat sealed hinges. They provide the ultimate in organization and convenience and are clearly labeled on the inside lid for easy recognition. KIT CONTAINS: GENERAL USE RANGE Quantity SKU SEALABLE WIRE RANGE LENGTH RECOVERED EXPANDED MAX. CONDUCTOR O.D. MIN. SEAL LENGTH PER SIDE 9 HWHS-8-2-6 8-2 AWG 6" 0.170 0.550 0.410 2.000 3 HWHS-6-40-6 6-4/0 AWG 6" 0.250 0.860 0.690 2.000 3 HWHS-2-500-6 2 AWG- 500 MCM 6" 0.350 1.220 1.060 2.000 3 HWHS-20-750-6 2/0 AWG - 750 MCM 6" 0.510 1.730 1.300 2.000 MANUFACTURER:

Cast Aluminum Meter Socket Lug 4/0 AWG - 1/2 Bolt Made of dead-soft EC grade aluminum. 840 common dies- one die installs on all sizes. For aluminum or copper conductors. Pre-filled with oxide inhibitor. Installing dies (color red): .840, 18, 324, TX, 76, 11A, 249.

Dual Rated Aluminum Splice 4 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.

Pre-Insulated Service Entry Sleeves 3-4 Str - 4 Sol Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

Solid Pin Terminal for Copper and Aluminum Conductors 6 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.

Enclosed Rotary Disconnects 3Pole 60A Plastic NEMA Type 4/4X Watertight Black Selector handle

Enclosed Rotary Disconnects 6Pole 60A Plastic NEMA Type 4/4X Watertight Red / Yellow Pistol handle 1 NO, 1 NC

Enclosed Rotary Disconnects 3Pole 60A Stainless Steel NEMA Type 4/4X Watertight Red / Yellow Pistol handle 1 NO, 1 NC