Showing 5389-5400 of 451,795 results

CompleTech
CA340S2++++
directional stacked yagi array - Frequency range: 326-353 MHz - Gain: 14 dBi - Polarization: vertical/horizontal - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 358 N
Contact for Pricing

CompleTech
RH
ring hybrid combiner/splitter - Frequency range: f0 3.8% MHz - Connector: 4*N-female - VSWR: <1.2
Contact for Pricing

CompleTech
CS150
power combiner/splitter - Frequency range: 144-156 MHz - Connector: N-female 2*N-male/TNC-female 2*TNC-male - VSWR: <1.5
Contact for Pricing

C2G
CG28866
This USB 3.0 (USB 3.1 Gen 1) USB-C to USB-B cable is the perfect solution for connecting a hard drive, hub, or other device that has a USB B port to a computer, tablet or other device that has a USB Type-C port for USB 3.0 (USB 3.1 Gen 1) communication. The color coded USB Type-C connector allows this cable to be easily identified as a USB 3.0 (USB 3.1 Gen 1) cable and differentiated from other cables which may support a different feature set. The USB Type-C connector is smaller than traditional USB connector and features a symmetrical design which allows it to be easily connected on the first try. Additionally, the durability of the USB Type-C connector allows for up to 10,000 connection cycles. This cable supports a data rate up to 5Gbps for data transfer and sync with 5 volts and 1 amp of power for device operation and charging. Note: This cable is designed to support USB 3.0 (USB 3.1 Gen 1) communication and features and is not able to support USB 3.1 Gen 2 Communication and features. Connector 1: (1) USB-C Male Connector 2: (1) USB 3.0 B Male Features * Connect the USB-B port of a hard drive, hub or other device a USB Type-C port * Designed to support USB 3.0 (USB 3.1 Gen 1) communication and features * Backwards compatible with USB 3.0 devices * Color coded blue and labeled to designate USB 3.0 (USB 3.1 Gen 1) feature support
Contact for Pricing

C2G
CG28833
The USB-C to A SuperSpeed USB 5Gbps Male to Male Cable is the perfect solution for connecting any standard USB-C enabled device to a USB-A device or accessory for charging and data transfer. Ensure that a USB-C equipped laptop, smartphone, or tablet is fully charged and ready to go from the 3A charging output, while simultaneously transferring photos, music, or data at speeds up to 5Gbps. The USB-C connector has a symmetrical design which is identical on both sides, so it does not matter if you plug it in upside-down or right-side-up. It will plug in the first time, every time while preventing damage to the connector port. Features * Data transfer speeds up to 5Gbps * 3A charging output * Reversible, symmetrical USB-C connector * USB IF Certified 28833
Contact for Pricing

Mencom Corporation · Mencom
CMAV-03L21
Insulated, Rectangular Hood, size 57.27, 2 Pegs, Top PG21 cable entry, High Construction
Contact for Pricing

Contact for Pricing

Contact for Pricing

Contact for Pricing

INVERTER NACFW110515T4SZ WEG specifications: Power supply 380-480 V; Input phases Three-phase; Configuration Basic; Rated current (ND) 515 A; Rated current (HD) 477 A; RFI filter With filter (C3 category); Enclosure IP20; Dynamic braking Standard without braking; Safety Stop No; Electronic supply Internal
Contact for Pricing

Contact for Pricing

Photovoltaic fuse gPV 1500VDC IEC 1500VDC UL Size 10x85 4A With Crimp Cap For Crimp
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*