Wire Marker Cards - Vinyl Cloth, Solid Letters, Legend S. 1-1/2 inch. Package of 25 Cards.

Fluoropolymer Insulated Ring Terminal For Wire Range 12-10 Stud Size #8, Clear/Yellow Stripe

Vinyl Insulated Ring Terminal, Length .97 Inches, Width .31 Inches, Maximum Insulation .200, Bolt Hole #8, Wire Range #18-#14 AWG, Color Blue, Copper, Tin Plated, On Mylar Tape, 1,000 Pack

Single lever locking panel base with cover. For use with B16, C6, V6, D40 and DD72 series.

GENERAL PURPOSE PACKAGED DRIVE W/ DISCONNECT SWITCH AND FUSES, Product Family: ACS550, Horsepower: 7.5 HP, Output Current: 11.9 A, Voltage: 480 VAC , Voltage Range: 380-480V, NEMA 1 / UL Type 1 (IP21), Mounting: Wall-mounted, Advanced Control Panel, 3-Phase Input, 3-Phase Output, Frame: R1, Product HxWxD: 28.7 in x 7.8 in x 11.2 in, Product Weight: 33 lbs

MODULE DRIVE 4-QUADRANT (REVERSING), Product Family: DCS800, Horsepower: 200 HP @ 230 VAC / 500 HP @ 460 VAC, Output Current: 780 A @ 240 VDC / 806 A @ 500 VDC, Voltage: 230 VAC/240 VDC & 460 VAC/500 VDC, UL TYPE OPEN (IP00), Mounting: Wall-mount, DDCS Communications Board, 120 VAC Fan Voltage, 3-Phase Input, Frame: D4, Product HxWxD: 25.4 in x 10.6 in x 13.6 in, Product Weight: 84 lbs

Interface cable for communication between the DCF external field supply and the DCS800 drive and/or between DCS800 drives. The cable supports communication for 12 pulse operation and drive-to-drive communication with the SDCS-DSL-4 board. This cable is 33 feet (10 m) long and has ferrule-tipped wires on both ends.

The RDCO-01 module includes the connectors for fiber optic DDCS channels CH0, CH1, CH2 and CH3. The usage of these channels is determined by the application but are normally assigned to the following: CH0 – overriding system (e.g. fieldbus adapter) - 10 MBd. CH1 – I/O extensions - 5MBd. CH2 – Master/Follower link - 10 MBd. CH3 – PC tools (such as DriveWare) - 10 MBd.

The three phase field supply converters DCS800-S01 and -S02 drives need a separate active over voltage protection for proper operation on the inductive load of a motor field. This unit will protect the drive against inadmissible high voltages. The DCF506-0520 is to be used with -0200-05 through -0520-05 units.

Braking Resistor, 200 OHMS, 600 WATTS, GCE2 Enclosure, ABB, 12W x 7D x 5H in, 10 lbs

Braking Resistor, 22 OHMS, 3168 WATTS, GCE8 Enclosure, 19W x 13D x 5H in, 25 lbs

#12 AWG insulated fifteen-inch stranded pigtail with a captive 10-32 x 3/8 inch round head screw on one end and a fork-tongue terminal on the other end