SECND KIT FOR 1800H

directional yagi - Frequency range: 405-440 MHz - Gain: 10 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 92 N

directional end fire yagi array - Frequency range: 405-440 MHz - Gain: 10 dBi - Polarization: vertical/horizontal - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 238 N

Non-Ventilated Automation Transformer, Rolled Steel, 3 kVA, Primary Amps 3.6, Secondary Amps 4.6, 480 Volt Delta Primary, 308Y/220 Secondary, 60 HZ, Three Phase

The Innovative and comprehensive UltraSafe range of Mersen fuse-holders. Modular fuse-holders are finger-safe under IEC standards to an IP20 grade of protection, including fuse changing (with the flick of a finger). Modular fuse-holders are available in 1, 2, 3 or 4 poles, with or without visual blown fuse indicators, in UL + IEC version. Multi-pole units can also be field assembled by ordering pin-ties assembly kit. , UltraSafe range is made of tough and durable thermoplastic or thermoset material. For 10x38 PV fuses with indicator

IOL-3300/TRX-1D-13-SM-ST Transceiver/24V/1xDI/1xDO/TX/RX/SM/ST

FIMP-S-06xSC/SC-D/0-PC (polymer) SB 9-SM

Industrial compact 4G/LTE Router with 9-36V DC non-isolated input - GNSS and WiFi

DIN-rail PoE Injector and PSU Combination Unit

Amp-Trap 2000 time-delay AJT fuses provide IEC Type "2" (No Damage) protection to main, feeder, and branch-circuits, for all types of loads - yet, they require only half the mounting space needed for 600V UL Class RK fuses. Time-delay characteristics handle motor in-rush currents without nuisance trips. Its current-limiting ability and wide range of ratings provide excellent overcurrent protection for all your applications. An optional mechanical blown fuse indicator and Microswitch is available on blade-type (70 to 600A) fuses for visual and/or remote blown fuse indication. 600 Volts 4 amps .

Mersen GPM-G panel mount fuse holders will accommodate 1/4"x1-1/4" fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 10 Amps finger grip or screw cap 3/16 solder/QC terminal BULK PKG series.

FSPDBs introduce a new level of safety and ease for installing power distribution blocks. An IP20 level of finger safe protection is achieved using the FSPDBs and thus eliminates the need for special covers or custom Plexiglas sheets to protect your panels. FSPDBs (sizes 1 to 4) simply snap onto 35mm DIN rail to provide the quickest installation. And since they are modular, you can form any number of poles desired. If multi-pole panel mounting is desired, multiple-pole assembly pins are available. FSPDBs provide a safe, convenient way of splicing cables, splitting primary power into a variety of secondary circuits or providing a fixed junction tap-off point. size 2 cap .