Accessories

    Office Equipment and Accessories and Supplies

    Drives, Servos, and Motors

    Power Generation and Distribution Machinery and Accessories

    Structures, Building, and Construction

    Enclosures, Fans, and Environmental Controls

    Information Technology Broadcasting and Telecommunications

    Electronic Components And Supplies

    Safety Equipment and Supplies

    Tools and General Machinery

    Manufacturing Components and Supplies

    Distribution and Conditioning Systems and Equipment and Components

    Material Handling and Conditioning and Storage Machinery and their Accessories and Supplies

    Electrical Systems and Lighting and Components and Accessories and Supplies

    Laboratory and Measuring and Observing and Testing Equipment

    Industrial Manufacturing and Processing Machinery and Accessories

    Miscellaneous

Showing 925-936 of 10,147 results

Littelfuse SE-704-0T - SE-704-0T is an earth-leakage monitor with a supply voltage dc of 48.
Littelfuse · SE 704 Series

SE-704-0T

SE-704-0T


SE-704-0T is an earth-leakage monitor with a supply voltage dc of 48.

Contact for Pricing

Littelfuse T2800.0020 - OvercurrentOrEarth Fault Relay400/450V5A. The T2800 has a broad application as an earth fault – or single phase over current detection relay, it has a wide setting range for protection, control or monitoring. The relay detects the magnitude of the current and, on exceeding the preset value, an output relay will be activated after a preset time delay. Available in many versions, varying in supply voltage, measuring currents, and functions.
Littelfuse · Relay Series

T2800.0020


OvercurrentOrEarth Fault Relay400/450V5A. The T2800 has a broad application as an earth fault – or single phase over current detection relay, it has a wide setting range for protection, control or monitoring. The relay detects the magnitude of the current and, on exceeding the preset value, an output relay will be activated after a preset time delay. Available in many versions, varying in supply voltage, measuring currents, and functions.

Contact for Pricing

Littelfuse T2500.0070 - Overcur&Shrt Circ400/450V5AExt out relay. The T2500 is a high quality Over-Current and Short-Circuit relay intended for protection against thermal damage and faults caused by excessive currents. The T2500 can be used to protect generators, power transmission lines and various types of consumer supplies. The T2500 monitors two levels of current and trips the circuit breaker when one of these two levels has been exceeded continuously for a time period (defined by an adjustable delay). The T2500 will support the connection of up to three phases, but will react on the largest of these three measurements. The current measurements are done through external current transformers (CTs) – typically with a secondary current of 5A. The Over-Current function can be adjusted to trip within the range of 0.5 to 1.4 x I (input current). The delay of the Over-Current function can be set between 3 to 30 seconds. The Short-Circuit function operates within the range of 1.0 to 4.0 x I. The Short-Circuit delay can be set between 0.1 and 1 second. The T2500 will react on the highest of the three input currents. The Pick-up LED will ignite as soon as the level is exceeded, while the relay is activated only after the delay has passed.
Littelfuse · Relay Series

T2500.0070


Overcur&Shrt Circ400/450V5AExt out relay. The T2500 is a high quality Over-Current and Short-Circuit relay intended for protection against thermal damage and faults caused by excessive currents. The T2500 can be used to protect generators, power transmission lines and various types of consumer supplies. The T2500 monitors two levels of current and trips the circuit breaker when one of these two levels has been exceeded continuously for a time period (defined by an adjustable delay). The T2500 will support the connection of up to three phases, but will react on the largest of these three measurements. The current measurements are done through external current transformers (CTs) – typically with a secondary current of 5A. The Over-Current function can be adjusted to trip within the range of 0.5 to 1.4 x I (input current). The delay of the Over-Current function can be set between 3 to 30 seconds. The Short-Circuit function operates within the range of 1.0 to 4.0 x I. The Short-Circuit delay can be set between 0.1 and 1 second. The T2500 will react on the highest of the three input currents. The Pick-up LED will ignite as soon as the level is exceeded, while the relay is activated only after the delay has passed.

Contact for Pricing

Littelfuse T2600.0040 - Dual Current Relay400/450V5A 30 sec. The T2600 determines load depending start and stop level of the diesel generator. When load increases on the running diesel generators more than e.g. 90percent adjustable, for a preset time, a start signal to call for the standby diesel generator will be provided. If the load decreases more than e.g. 45percent adjustable, for a preset time, a stop signal will be provided to dismiss one of the diesel generators. The T2600 can serve an installation with up to three diesel generators. The number of diesel generators can be extended.
Littelfuse · Relay Series

T2600.0040


Dual Current Relay400/450V5A 30 sec. The T2600 determines load depending start and stop level of the diesel generator. When load increases on the running diesel generators more than e.g. 90percent adjustable, for a preset time, a start signal to call for the standby diesel generator will be provided. If the load decreases more than e.g. 45percent adjustable, for a preset time, a stop signal will be provided to dismiss one of the diesel generators. The T2600 can serve an installation with up to three diesel generators. The number of diesel generators can be extended.

Contact for Pricing

Littelfuse T3200.0040 - Insul Monit Relay 24VDC w/24V DC/DC con. The Insulation Monitoring Relay T3200 is intended for continuous insulation monitoring on three phase insulated networks on board ships. The relay monitors continuously two systems galvanically separated from each other, e.g. the busbar and the lighting system, or two busbar systems. The unit features two output relays for alarm purposes and two analogue outputs for instrument reading. The instrument is not included with the relay. Instruments are available from as standard sized switchboard component.
Littelfuse · Relay Series

T3200.0040


Insul Monit Relay 24VDC w/24V DC/DC con. The Insulation Monitoring Relay T3200 is intended for continuous insulation monitoring on three phase insulated networks on board ships. The relay monitors continuously two systems galvanically separated from each other, e.g. the busbar and the lighting system, or two busbar systems. The unit features two output relays for alarm purposes and two analogue outputs for instrument reading. The instrument is not included with the relay. Instruments are available from as standard sized switchboard component.

Contact for Pricing

Littelfuse T4800.0010 - Load Sharer. 400/450V 5A. The T4800 is designed to control a generator operating in parallel with the grid, or a generator operating in parallel with other generators (which are also controlled by T4800 units). The T4800 will continuously measure and compare the active current on the generator to an external DC reference signal connected to the “parallel lines” input. The T4800 will increase or decrease the speed of the generator (through the governor) if it finds the active current level to be either too low or two high. Two built-in relays provide the increase and decrease pulses for a conventional governor. The strength (width) of the pulses is proportional to the frequency/phase deviation. The E7800 Motorised Potentiometer can be used to adapt the contact pulses to a signal suitable for the speed trim input of an electronic speed controller.
Littelfuse · Relay Series

T4800.0010


Load Sharer. 400/450V 5A. The T4800 is designed to control a generator operating in parallel with the grid, or a generator operating in parallel with other generators (which are also controlled by T4800 units). The T4800 will continuously measure and compare the active current on the generator to an external DC reference signal connected to the “parallel lines” input. The T4800 will increase or decrease the speed of the generator (through the governor) if it finds the active current level to be either too low or two high. Two built-in relays provide the increase and decrease pulses for a conventional governor. The strength (width) of the pulses is proportional to the frequency/phase deviation. The E7800 Motorised Potentiometer can be used to adapt the contact pulses to a signal suitable for the speed trim input of an electronic speed controller.

Contact for Pricing

Littelfuse T4400.0120 - Load Sharer. 400/450 VAC 5A. The T4400 is designed to control a generator operating in parallel with the grid, or a generator operating in parallel with other generators (which are also controlled by T4400 units). The T4400 includes built-in frequency control and an optimized regulation scheme. These two features provide near perfect stability and compensates for any drift within the speed controller. A soft load/unload facility is also included.
Littelfuse · Relay Series

T4400.0120


Load Sharer. 400/450 VAC 5A. The T4400 is designed to control a generator operating in parallel with the grid, or a generator operating in parallel with other generators (which are also controlled by T4400 units). The T4400 includes built-in frequency control and an optimized regulation scheme. These two features provide near perfect stability and compensates for any drift within the speed controller. A soft load/unload facility is also included.

Contact for Pricing

Littelfuse T4500.0010 - Auto Synchronizer. 400/450V. The T4500 Auto-Synchroniser provides automatic synchronisation and connection of a generator to a live bus bar. The T4500 measures the voltage across two phases on either side of the circuit breaker in order to obtain data on frequency, phase and voltage deviation. The T4500 will automatically adjust the speed of the generator (through the governor) in order to match the frequency and phase to the live busbar. Two built-in relays provide the increase and decrease pulses for a conventional governor. The strength (width) of the pulses is proportional to the frequency/phase deviation. The E7800 Motorised Potentiometer can be used to adapt the contact pulses to a signal suitable for the speed trim input of an electronic speed controller. The T4500 will continuously adjust the generator speed until frequency and phase is within limits. The signal to close the circuit breaker is issued just before phase accordance is obtained. This is done in order to compensate for the circuit breaker make time.
Littelfuse · Relay Series

T4500.0010


Auto Synchronizer. 400/450V. The T4500 Auto-Synchroniser provides automatic synchronisation and connection of a generator to a live bus bar. The T4500 measures the voltage across two phases on either side of the circuit breaker in order to obtain data on frequency, phase and voltage deviation. The T4500 will automatically adjust the speed of the generator (through the governor) in order to match the frequency and phase to the live busbar. Two built-in relays provide the increase and decrease pulses for a conventional governor. The strength (width) of the pulses is proportional to the frequency/phase deviation. The E7800 Motorised Potentiometer can be used to adapt the contact pulses to a signal suitable for the speed trim input of an electronic speed controller. The T4500 will continuously adjust the generator speed until frequency and phase is within limits. The signal to close the circuit breaker is issued just before phase accordance is obtained. This is done in order to compensate for the circuit breaker make time.

Contact for Pricing

Littelfuse B6300.0010 - Overcurrent/time Unit. B6000 generator protection system is designed for protection of parallel working AC generators. Besides reverse power and overload protection, this system also includes short circuit protection. Optionally, the system can be equipped with frequency detection. The relay can be provided with two extra overcurrent/time units which can be used for alarms and/or tripping of non-essential load. It is also possible to obtain normally energized or normally de-energinzed output relay functions for each of the output relays. Overcurrent/time unit.
Littelfuse · Relay Series

B6300.0010


Overcurrent/time Unit. B6000 generator protection system is designed for protection of parallel working AC generators. Besides reverse power and overload protection, this system also includes short circuit protection. Optionally, the system can be equipped with frequency detection. The relay can be provided with two extra overcurrent/time units which can be used for alarms and/or tripping of non-essential load. It is also possible to obtain normally energized or normally de-energinzed output relay functions for each of the output relays. Overcurrent/time unit.

Contact for Pricing

Littelfuse H4900.0010 - Programming software. Programming software
Littelfuse · H4000 Series

H4900.0010


Programming software. Programming software

Contact for Pricing

Littelfuse G2000.0010 - G2000 Power Relay. 24V DC 5A. The G-Line relays are mainly intended for use in land-based applications. The G-Line relays provides an efficient solution for applications where flexibility and cost of purchase are the main issues. Despite a low purchase price, G-Line relays provide high quality, proper measuring techniques and a vast number of programmable options. Safety, accuracy and repeatability are important features in any protection system. G-Line relays all have built-in measuring transformers, one for each phase measurement. Transformers provide the best possible isolation with near perfect linearity and thereby no loss of accuracy. Voltages and currents can be measured through resistors or optical couplers.
Littelfuse · G2000 Series

G2000.0010


G2000 Power Relay. 24V DC 5A. The G-Line relays are mainly intended for use in land-based applications. The G-Line relays provides an efficient solution for applications where flexibility and cost of purchase are the main issues. Despite a low purchase price, G-Line relays provide high quality, proper measuring techniques and a vast number of programmable options. Safety, accuracy and repeatability are important features in any protection system. G-Line relays all have built-in measuring transformers, one for each phase measurement. Transformers provide the best possible isolation with near perfect linearity and thereby no loss of accuracy. Voltages and currents can be measured through resistors or optical couplers.

Contact for Pricing

Littelfuse B6100.0010 - Short Circuit Unit. B6000 generator protection system is designed for protection of parallel working AC generators. Besides reverse power and overload protection, this system also includes short circuit protection. Optionally, the system can be equipped with frequency detection. The relay can be provided with two extra overcurrent/time units which can be used for alarms and/or tripping of non-essential load. It is also possible to obtain normally energized or normally de-energinzed output relay functions for each of the output relays. Short circuit unit.
Littelfuse · Relay Series

B6100.0010


Short Circuit Unit. B6000 generator protection system is designed for protection of parallel working AC generators. Besides reverse power and overload protection, this system also includes short circuit protection. Optionally, the system can be equipped with frequency detection. The relay can be provided with two extra overcurrent/time units which can be used for alarms and/or tripping of non-essential load. It is also possible to obtain normally energized or normally de-energinzed output relay functions for each of the output relays. Short circuit unit.

Contact for Pricing

Showing 925-936 of 10,147 results