Authorized Littelfuse Distributor
Littelfuse T4800.0010 - Load Sharer. 400/450V 5A. The T4800 is designed to control a generator operating in parallel with the grid, or a generator operating in parallel with other generators (which are also controlled by T4800 units). The T4800 will continuously measure and compare the active current on the generator to an external DC reference signal connected to the “parallel lines” input. The T4800 will increase or decrease the speed of the generator (through the governor) if it finds the active current level to be either too low or two high. Two built-in relays provide the increase and decrease pulses for a conventional governor. The strength (width) of the pulses is proportional to the frequency/phase deviation. The E7800 Motorised Potentiometer can be used to adapt the contact pulses to a signal suitable for the speed trim input of an electronic speed controller.

Littelfuse T4800.0010 Load Sharer. 400/450V 5A. The T4800 is designed to control a generator operating in…

UPC: 079458963342


Documents & Media
Brochure

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The Littelfuse T4800.0010 Load Sharer is a critical component for advanced generator management, specifically engineered for applications requiring parallel operation with the utility grid or with other generators. This robust unit, rated for 400/450V and 5A, ensures seamless and stable power distribution by precisely controlling generator output. At its core, the T4800.0010 continuously monitors the active current generated by an individual generator. This measurement is then compared against an external DC reference signal provided via the "parallel lines" input. This sophisticated comparison allows the T4800 to dynamically adjust the generator's speed. If the active current is found to be too low, indicating underutilization or a need for increased load sharing, the unit will signal the generator's governor to increase speed. Conversely, if the active current is too high, suggesting an overload or imbalance in the parallel system, the T4800 will command the governor to decrease speed. Key features of the Littelfuse T4800.0010 include: * **Precise Load Sharing:** Maintains optimal active current levels for balanced generator operation. * **Dual Relay Output:** Provides dedicated "increase" and "decrease" pulses for direct control of conventional governors. * **Proportional Pulse Width:** The strength (width) of the output pulses is directly proportional to the frequency and phase deviation, allowing for fine-tuned adjustments. * **Versatile Integration:** Designed for compatibility with conventional governor systems. For electronic speed controllers, the optional E7800 Motorised Potentiometer can be integrated to adapt the contact pulses into a suitable signal for the speed trim input. This load sharer is indispensable in industrial settings where reliable backup power, load shedding, or peak shaving operations are paramount. Industries such as manufacturing plants, data centers, hospitals, and telecommunication facilities rely on such precise control to prevent system instability and ensure uninterrupted power supply. The Littelfuse T4800.0010 is built with the quality and reliability expected from Littelfuse, a trusted name in circuit protection and power control solutions. Its robust design ensures longevity and consistent performance even in demanding environments. By accurately managing generator output in parallel configurations, the T4800.0010 not only enhances operational efficiency but also contributes to the overall longevity of the generator set by preventing over- or under-loading conditions. Its ability to adapt to different governor types through the use of accessories like the E7800 further solidifies its position as a flexible and essential solution for complex power management challenges.
  • Controls generator speed for parallel operation with grid or other generators.
  • Monitors and compares active current to an external DC reference signal.
  • Adjusts generator speed via governor for optimal active current levels.
  • Features two built-in relays for increase/decrease pulses to conventional governors.
  • Pulse width is proportional to frequency/phase deviation for precise control.

Specifications

Application
Industrial
Brand Name
Littelfuse
Current Rating
5 A
Series
T4800
Special Features
High Quality
Sub Brand
Relay Series
Type
Protection Relays and Controls
Voltage Rating
400/450 V
Relay Accessories, Sockets & Clips, Printed Circuit Board, Phenolic, Printed Circuit Board, 6, Socket, Potter & Brumfield R10

1-1393143-3

Relay Accessories, Sockets & Clips, Printed Circuit Board, Phenolic, Printed Circuit Board, 6, Socket, Potter & Brumfield R10
Relay Accessories, Sockets & Clips, Solder, Polyester, Printed Circuit Board, 2, Socket, Potter & Brumfield R10

1-1393143-6

Relay Accessories, Sockets & Clips, Solder, Polyester, Printed Circuit Board, 2, Socket, Potter & Brumfield R10
RTXD Extractor Tool

6896057-1

RTXD Extractor Tool
Power supply for DIN-rail

PS-60

Power supply for DIN-rail
IP67 SCP-X Extreme Environment Series Power Supply. Double Stacked, Output Power 2 x 100W, Output Voltage 24 Vdc, Output Current 7.6 A total, 3.8 A per pair

SCP102D24X-C02

IP67 SCP-X Extreme Environment Series Power Supply. Double Stacked, Output Power 2 x 100W, Output Voltage 24 Vdc, Output Current 7.6 A total, 3.8 A per pair

Frequently Asked Questions

What types of fuses does Littelfuse offer for industrial applications?

Littelfuse offers UL Class fuses, high-speed fuses, medium voltage fuses, 10 x 38 mm fuses, and solar fuses for industrial applications.

What are Littelfuse high-speed fuses used for?

High-speed fuses protect critical power semiconductor devices against short circuits in power conversion applications like inverters and variable-speed drives.

What is the voltage range for Littelfuse solar fuses?

Littelfuse offers solar fuses and holders up to 1500 Vdc for both high-current and low-current applications.

What protection do feeder protection relays offer?

Feeder protection relays protect circuits from overcurrent, ground faults, phase loss, overload, and other detrimental conditions.

What is the Industrial Shock-Block® GFCI designed for?

It is designed for people protection in industrial facilities and meets UL Standard 943C Class C and Class D.

What do Littelfuse voltage monitors protect against?

Voltage monitors provide protection against both supply line and load side faults when the motor is running.

How do arc-flash protection relays enhance safety?

These relays detect developing arc-flash incidents and send a trip signal to interrupt power before significant damage occurs.

What types of protection do Littelfuse motor protection relays offer?

They offer voltage monitors, current monitors, and Bluetooth-enhanced overload relays for low and medium voltage applications.

What is the purpose of Littelfuse Techline support?

Techline experts answer questions about product cross-references, general technical information, engineering drawings, and application assistance.

What applications are 10 x 38 mm fuses suitable for?

These fuses provide compact supplemental protection for a wide variety of applications, available in time-delay or fast-acting versions.

Frequently Asked Questions about Littelfuse

What certifications and standards do Littelfuse products comply with?

Littelfuse products are certified to multiple international standards, including UL (Underwriters Laboratories), CSA (Canadian Standards Association), CCC (China Compulsory Certification), and EAC (Eurasian Conformity). Customers can verify specific product certifications by consulting individual product datasheets on Littelfuse.com, which provide comprehensive details about standards compliance for each component.

What industries and applications are Littelfuse products used for?

Littelfuse products are critical for electrical protection and safety across multiple industrial sectors, including manufacturing, automation, power distribution, and electrical control systems. Their comprehensive product portfolio serves industries that require robust electrical protection, including motor and pump applications, solar installations, programmable logic controllers (PLCs), electrical switch panels, and critical infrastructure environments. Key product lines protect against overcurrent, voltage transients, ground faults, and temperature-related electrical risks, ensuring equipment safety and operational reliability.

What technical support does Littelfuse offer?

Littelfuse offers comprehensive technical support through multiple channels. Their Technical Hotline (800-TEC-FUSE) provides direct access to engineers who can help identify issues and recommend solutions. Additionally, Littelfuse offers extensive online Technical Resources at Littelfuse.com, including datasheets, product manuals, whitepapers, application guides, and online design tools. Their experienced product and application engineers also provide step-by-step support from design to installation.

What are the main product lines offered by Littelfuse?

Littelfuse offers comprehensive industrial protection and control product lines, including fuses, fuse holders, protection relays, temperature sensors, and electrical safety components. Their key product categories span surge protective devices, custom OEM products, electrical switch panels, medium voltage fuses, ground-fault protection relays, motor and pump protection devices, and temperature sensors. These products are designed to minimize electrical safety hazards, limit equipment damage, improve productivity, and safeguard personnel from electrical faults.

What are the key features of Littelfuse products?

Littelfuse products feature exceptional circuit protection technologies with key characteristics including UL/IEC safety standard compliance, low internal resistance, and advanced protective capabilities across multiple product lines. Their components provide critical protection for industrial systems, offering features like overcurrent protection, voltage transient suppression, and resettable protection devices with ultra-low resistance and compact designs. Key product lines include fuses, metal oxide varistors (MOVs), TVS diodes, PolySwitch devices, and specialized electronic protection components that enhance system reliability and safety.

What environmental ratings do Littelfuse products have?

Littelfuse products feature comprehensive environmental ratings, including NEMA Type 1, 2, 3, 3R, 4/4X, 12, and 13 certifications, as well as IP65 protection. These ratings ensure superior protection in diverse industrial environments, with an operating temperature range of -40°F to +131°F (-40°C to +55°C). Many products also include UV-stabilized materials and neoprene gaskets for enhanced durability in outdoor and challenging conditions.

What accessories are available for Littelfuse products?

Littelfuse offers several key accessories across their product lines, including fuse holders, voltage monitoring modules, and terminal connectors. Specific accessories include the LPSM003ZXID (indicating) and LPSM003Z (non-indicating) POWR-SAFE Dead Front fuse holders for Class CC and Midget-Style fuses, the VRM6048 voltage monitor accessory module, and female quick connect terminals (P1015 series) in various wire gauge sizes. These accessories are designed to enhance protection, monitoring, and connectivity for Littelfuse electrical components.

What is Littelfuse's warranty policy?

Littelfuse provides comprehensive warranty details on their official website at www.littelfuse.com/warranty. Customers should visit this page to review the specific warranty terms and conditions for their specific product lines. For direct warranty support or questions, customers can contact Littelfuse Technical Support at 1-800-TEC-FUSE or email [email protected].

What communication protocols do Littelfuse products support?

Littelfuse supports a comprehensive range of industrial communication protocols, including PROFIBUS, PROFINET, EtherNet/IP, DeviceNet, Modbus RTU, and CANopen. Our products provide flexible connectivity solutions across multiple industrial automation platforms, enabling seamless integration with various control systems and network architectures.

How are Littelfuse products typically installed?

Littelfuse products are typically installed using specialized mounting hardware like fuse holders, blocks, and panels designed for specific industrial applications. The POWR-SAFE Dead Front holders, for example, provide optimum protection for Class CC and Midget-Style fuses, supporting installations up to 600 VAC/DC. Installation often involves using precision terminals with strain relief, such as 0.25 in. female quick connect terminals, to ensure secure and safe electrical connections in industrial control systems.