Showing 505-516 of 10,147 results

Littelfuse · 342 Series
H342038L
P MOUNT HOLDER H-PACK 38A L WASH. Panel Mount Enclosed Fuse Holders for 3AG/AB Fuses.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Contact for Pricing

Littelfuse · Shock-Safe
H3453HS1L
ACS INTL SHOCK-SAFE 3AG FUSEHLDR HS1L. International Shock-Safe Panel Mount Fuseholder for 3AG/3AB Fuses.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Littelfuse · Shock-Safe
H3453LF7A
ACS INTL SHOCK-SAFE 3AG FUSEHLDR LF7A. International Shock-Safe Panel Mount Fuseholder for 3AG/3AB Fuses.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Littelfuse · Shock-Safe
H3453LS2LNP
ACS INTL SHOCK-SAFE 3AG FUSEHLDR LS2LNP. International Shock-Safe Panel Mount Fuseholder for 3AG/3AB Fuses.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Littelfuse · ATO Series 287
0287001.PXCN
FAST-ACTING AUTOMO BLADE P-PACK 1A. Developed by Littelfuse for the automotive industry, the ATOF® fuse has become the original equipment circuit protection standard for foreign and domestic automobiles and trucks. Readily identifiable and easily replaced, this fuse can be specified for a variety of low voltage electronic applications.
Contact for Pricing
Minimum Qty: 2000
Multiplier: 2000
*Contact for lower quantities*

Littelfuse · Shock-Safe
H3455RF2L
ACS INTL SHOCKSAFE 5X20MM FUSEHLDR RF2L. International Shock-Safe Panel Mount Fuseholder for 5x20mm Fuses.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Contact for Pricing

The L70QS series is a next generation high-speed fuse for the protection of power semiconductor devices and is designed in the traditional North American bolted style package. L70QS series high-speed fuses are extremely current limiting and are used to protect power converters, drives and control circuit applications. Designed with lower I2t performance characteristics, these fuses provide balanced performance to extend longevity while lowering potentially damaging heat energy to the devices being protected. In addition L70QS series fuses have been designed with a universal mounting option to meet customer requirements for installation into a variety of application configurations Littelfuse POWR-SPEED products offer optimized circuit protection at the extremely fast speed required to protect modern day, sensitive, high-power semiconductor devices. Such products are commonly found in various industries including pulp and paper industries, cranes and heavy-lifting equipment, processing industries, wastewater treatment plants and large factories and MRO facilities.
Contact for Pricing

The THC/THS Series is a solid-state relay and timer combined into one compact, easy-to-use control. When mounted to a metal surface, the THC/THS Series may be used to directly control lamp or heater loads of up to 20A steady, 200A inrush. Its single shot function can perform dispensing and pulse shaping operations. The initiate switch can be a momentary or maintained type of switch. Time delays can be selected from 0.1 - 600 seconds in 4 ranges. The THC/THS Series is used for coin vending applications where fast initiate response is required. Operation (Single Shot): Input voltage must be applied before and during timing. Upon momentary or maintained closure of the initiate switch (leading edge triggered), the output energizes for a measured interval of time. At the end of the delay, the output de-energizes. Opening or reclosing the initiate switch during timing has no affect on the time delay. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reset occurs when the time delay is complete and theinitiate switch opens. Loss of input voltage resets the time delay and output.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

The HRDB Series combines an electromechanical, relay output with microcontroller timing circuitry. The HRDB offers 12 to 230V operation in five options and factory fixed, external, or onboard adjustable time delays with a repeat accuracy of ±0.5%. The isolated output contact rating allows for direct operation of heavy loads, such as compressors, pumps, blower motors, heaters, etc. The HRDB is ideal for OEM applications where cost is a factor. Operation (Delay-on-Break): Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output relay energizes. The time delay begins when the initiate switch is opened. The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Littelfuse · Symcom
355-600
3PH VltMon/475-600V/VUB,TD,RD/480V rel.. The 355 is a 3-phase voltage monitor with adjustable trip and restart delay, adjustable voltage unbalance and multiple diagnostic lights. It is perfect for heavy-duty applications that need both protection and simple user-friendly diagnostics. Applications include pump panels, commercial HVAC, oil rigs and others. The 355 uses microcontroller technology to monitor incoming voltage and de-energize its output relay if power problems exist. The 355 can protect motors from damage caused by single-phasing, high and low voltage, phase reversal and voltage unbalance. It has four diagnostic LEDs that clearly show overvoltage, undervoltage, voltage unbalance, reverse-phase and normal conditions. Equipped with a 470VA @ 600VAC pilot duty SPDT relay. A high voltage (600V) DPDT relay output option is available with the 400V model.
Contact for Pricing