Showing 9817-9828 of 452,166 results

NSI Industries · Polaris · Connector Blocks
AL-R1-M4
Power Distribution Block (1) 500 MCM-4 AWG Primary (4) 4/0-6 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.
Contact for Pricing

Contact for Pricing

Contact for Pricing

Contact for Pricing

NSI Industries · Polaris · Copper Compression
L700NB
2 Hole Long Barrel Copper Compression Lug for Flexible Copper Cable 700 MCM - 1/2" Bolt Compression lugs for flexible copper cables are connects that have a gentle, continuous flared end to ensure ease of cable insertion of flexible and extra flexible cables such as locomotive, welding, mining cable and more. The flared end also reduces pressure on the cable strands after installation and protects them from chafing and breakage as a result of cable movement. Tin-plated for corrosion resistance. Rated 600 volts for copper cables only. Single mounting hole.
Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*

NSI Industries · NSI · Tools
CD18A
U-Type Compression Die - Brown 500 MCM Copper - 350 MCM Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.
Contact for Pricing

NSI Industries · Polaris · Polaris Black
IPLD350-3
The Polaris IPLD350-3 Multi-Tap Dual-Sided Entry Black Connector features 3 ports sized for 350 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Black
IPLD350-10
The Polaris IPLD350-10 Multi-Tap Dual-Sided Entry Connector features 10 ports sized for 350 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

NSI Industries · NSI · Indicator Lights
79720LW
Red Press In Indicator Light - White Bezel High quality indicator lights are made of nylon with polycarbonate lens material and neon lamps. 125-Volt rated. Connection with 6 inch wire leads.
Contact for Pricing

Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

NSI Industries · NSI · Easy-Splice
HSC-195
Easy-Splice Heat Shrinkable End Cap 750 - 1500 MCM These caps replace greases, tapes, epoxy, encapsulation, or dips. In most sizes, installation may be accomplished in less than one minute. Heat-shrinkable end caps provide for efficient and positive cable end sealing. Made of thermally stabilized polyolefin, the interior of the HSC is coated with a meltable sealant to assure a watertight seal, complete insulation, abrasion and corrosion resistance. Seals may be affected over lead, steel, aluminum, copper and all standard plastic and elastomeric insulating materials and conduit. HSC end sealing caps are qualified to ANSI C119.1-1986 and rated to ICEA electrical withstand test for 1,000 volts. HSC end sealing caps can be used as a live seal for cables carrying up to 1,000 volts. They can also be used as end seals for storing and pulling de-energized cable.
Contact for Pricing

NSI Industries · NSI · Tools
CB100
Aluminum conduit bender for 1 Inch EMT or 3/4 Inch Rigid Conduit has an 8 degree inside radius. It has cast in-angle indicators with raised bending points of reference to aid the installer. The body is aluminum die cast which is lightweight yet strong enough for everyday use. FEATURES: INSIDE RADIUS: 8 Degree TYPE: Aluminum Die Cast USE: 1 Inch EMT or 3/4 Inch Rigid Conduit
Contact for Pricing