Showing 1993-2004 of 452,164 results

Mini-Change® MPIS, 3 Pole Female, 6 Ports with 8 Pole Male Connector
Contact for Pricing

Mini-Change® A-Size Double-Ended Cordset, 3 Poles, Male (Straight) to Female (Straight), PVC Cable, 4.60m Length
Contact for Pricing
Minimum Qty: 4
Multiplier: 1
*Contact for lower quantities*

ABB - Electrification · ABB
PAL2412
ABB ReliaHome makes homes reliable, with ease. We designed our ReliaHome load centers to be installed as fast as possible – and reliable so your customers can leave a job with confidence. They work seamlessly with all our residential circuit breakers, optimizing your stock.
Contact for Pricing

Mini-Change® A-Size Receptacle, 3 Poles, 1/2" - 14 NPT Threads, Female (Straight) to 16 AWG Leads, 0.305m (1.0') Length
Contact for Pricing
Minimum Qty: 4
Multiplier: 1
*Contact for lower quantities*

DRIVE CFW500B24P0T4DB66DSG2 WEG specifications: Power supply 380-480 V; Input phases Three-phase; Configuration With options; Rated current (HD) 24 A; RFI filter Without filter; Enclosure IP66; Dynamic braking Standard with braking; Safety Stop Prepared to install the accessory CFW500-SFY2
Contact for Pricing

Braking Resistor, 8.06 OHMS, 5119 WATTS, GCE9 Enclosure, 26.5W x 10D x 5H in, 24 lbs
Contact for Pricing

The three phase field supply converters DCS800-S01 and -S02 drives need a separate active over voltage protection for proper operation on the inductive load of a motor field. This unit will protect the drive against inadmissible high voltages. The DCF506-0140 is to be used with -0020-05 through -0140-05 units.
Contact for Pricing

CABINET DRIVE ULTRA LOW HARMONIC, Product Family: ACS800, Horsepower: 450 HP, Output Current: 571 A, Voltage: 480 VAC, Voltage Range: 380-500V, NEMA 1 / UL Type 1 (IP21), Floor-mounted, Local or Remote Mounted LCD Display and Keypad, 0510 KVA, 3-Phase Input, 3-Phase Output, Frame: R8i, Product HxWxD: 91.1 in x 48.4 in x 25.4 in, Product Weight: 2090 lbs
Contact for Pricing

MACHINERY DRIVE, Product Family: ACS850, Horsepower: 60 HP, Output Current: 90 A, Voltage: 480 VAC, Voltage Range: 380-500V, UL TYPE OPEN (IP20), Mounting: Cabinet-mounted (Side-by-Side), Control Unit Cover with Drive Mount Control Panel, Standard Control Program Version UIFI2020, 3-Phase Input, 3-Phase Output, Frame: D, Product HxWxD: 22.3 in x 8.7 in x 11.8 in, Product Weight: 51 lbs
Contact for Pricing

Externally mounted, half controlled 3-phase field exciter, with single quadrant operation. This field supply is current regulated with a max output current of 35 amps. With 1-phase input, an autotransformer is recommended for voltage adaptation. An input line reactor is required when supply voltage is over 400 Vac. Fuses are always required. DSL communication cable is required. Communication to the converter unit is required via the SDC-DSL-4 board, standard in D5-D7 and all drives 600 Vdc or greater, otherwise optional.
Contact for Pricing

NSI Industries · Polaris · Polaris Grey
ITG-1B
The Polaris ITG-1B Grey Multi-Tap Single Side Entry Connector features 2 ports sized for 1 - 10 AWG Class B, C or D wires or 2 - 10 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires and pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
Contact for Pricing

NSI Industries · Polaris · Polaris Black
IPLD2-4
The Polaris IPLD2-4 Multi-Tap Dual-Sided Entry Black Connector features 4 ports sized for 2 AWG - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*