Showing 7453-7464 of 452,166 results

Contact for Pricing

NSI Industries · Polaris · Polaris EDGE
ISPB350-3
The Polaris ISPB350-3 Multi-Tap Direct Burial Single-Sided Entry Connector features 3 ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and is designed for use in a wide range of temporary submersed or burial splicing applications.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

NSI Industries · Polaris · Copper Compression
L2N-38P
2 Hole Long Barrel Peep Hole Copper Compression Lug with Peep Hole 2 AWG - 3/8" Bolt - 1" Mounting Spacing Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.
Contact for Pricing

Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

NSI Industries · NSI · Miniterms
S12-6V-L-BULK
12-10 AWG, # 6 Stud Vinyl Insulated Locking Spade, Bulk
Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

Contact for Pricing

NSI Industries · Polaris · Polaris EDGE
ISPB2/0-4
The Polaris ISPB2/0-4 Multi-Tap Direct Burial Single-Sided Entry Connector features 3 ports sized for 2/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds UL 486D and ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

NSI Industries · NSI · Miniterms
R16-14V-BULK
16-14 AWG Vinyl Insulated Ring 1/4"Stud - 1,000 Per Pack
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

NSI Industries · NSI · Miniterms
S22-10N-BULK
22-18 AWG Nylon Insulated Spade #10 Stud, 1,000 Per Pack
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

NSI Industries · NSI · Specialty Cable Ties
141000-N12
14" Nylon 12 UV Black Cable Ties are engineered for solar and wind power applications. They are designed to withstand harsh UV rays and chemicals. 120lb tensile strength-100 count pack.
Contact for Pricing