Showing 5017-5028 of 452,163 results

NSI Industries · Polaris · Polaris Black
IPLD2-5
The Polaris IPLD2-5 Multi-Tap Dual-Sided Entry Black Connector features 5 ports sized for 2 AWG - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

Slotted and Phillips Stove Bolt, 1-1/2 in. length, 3/8 in. diameter, Round head, Steel, Zinc Chromate finish, 16 thread pitch/thread per inch, 100 per pack
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Self Drilling Screw Kit, #8, #10 Size, 380 piece(s), Steel material, Pan head, Square drive type, Zinc finish, Self Drill Point, including a(n) (100) #8 x 1/2 in., (60) #8 x 3/4 in., (50) #8 x 1 in. Pan Square Self Drilling Screws and (80) #10 x 1/2 in., (50) #10 x 3/4 in., (40) #10 x 1 in. Pan Square Self Drilling Screws and (1) #2 x 2 in. Square Drive Power Bit - 100R2B
Contact for Pricing

Sheet Metal Screw, Self Piercing, #8 size, #8 driver size, 1/4 in. head width, Hex head, Steel, Slotted drive type, Zinc Chromate finish, 1/2 in. length, 1000 per pack. For use with MT208B Chuck.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

Contact for Pricing

NSI Industries · Polaris · Compression
ISE62
Pre-Insulated Service Entry Sleeves 6 Str - 4 Sol Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.
Contact for Pricing

NSI Industries · Polaris · Aluminum Compression
ASC350T
Dual Rated Aluminum Splice 350 MCM Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.
Contact for Pricing

NSI Industries · Polaris · Copper Compression
L20N
2 Hole Long Barrel Copper Compression Lug 2/0 AWG - 1/2" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.
Contact for Pricing

NSI Industries · Polaris · Copper Compression
L30N
2 Hole Long Barrel Copper Compression Lug 3/0 AWG - 1/2" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.
Contact for Pricing

Screw Hook, 4-1/8 in. overall length, Steel, 0.244 in. hook diameter, Thread Mount, Zinc Chromate finish, 100 per pack
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Quik-Bit Flat Wood Boring Bit, 13/16 in. size, 6 in. overall length
Contact for Pricing

14 x 1-1/2 (3/8 Hd) Indented Hex Washer DrillTip #3 Pt Steel Zinc u/m 1,000
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*