Showing 3745-3756 of 452,163 results

Littelfuse · E7800 Series
E7800.0640
Motorized Potentiometer24V DC,1turn 5k. The E7800 Motorized Potentiometer is typically used as an interface between increase/decrease relay contacts (or push buttons) and a device requiring control by an external potentiometer (e.g. the speed trim of an electronic governor). All three wires of the potentiometer are directly accessible on external connection terminals, thus providing the best possible flexibility for almost any application. A special version of the E7800 with DC voltage output is also available. The DC output voltage follows the position of the potentiometer. The design of the E7800 ensures that the potentiometer will “remember” its position although supply is lost
Contact for Pricing

SolaHD
SDU850A-5
SDU AC - A Series DIN Rail AC UPS, Wattage: 510 W, Capacity: 850 VA Voltage Rating:230 V AC, Frequency Rating:50/60HZ, Back-Up Time: 2 Minutes
Contact for Pricing

Strobe Combination Audible/Visual Signal, 24VDC, Amber - Available in 24VDC and 120VAC. Surface mount, integrated 1/2-inch NPT pipe mount and 4-inch electrical box mount. Five lens colors: Amber, Blue, Clear, Green and Red. Twist-off lens for easy access. Internal buzzer produces 85 dBA at 10 feet (95 dBA at 1m). Conformal coated PCB. Type 3R enclosure. CSA Certified. UL and cUL Listed.
Contact for Pricing

Electraflash Strobe Light, UL and cUL, 24VDC, Green
Contact for Pricing

Contact for Pricing

StreamLine Modular Audible Visual LED Light, Multifunctional, UL and cUL, Red, Base Sold Separately
Contact for Pricing

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Mersen plug fuses are intended for industrial and residential applications. Non time-delay fuses are available for receptacle and lighting circuits and time-delay fuses for motor loads. For Canadian requirements, a type P fuse is used for non-motor loads and Type D, for electrical heating and cyclical load circuits. Both fuses have low melting-point temperature elements. Type S plug fuses are time-delay and tamper resistant. 125 Volts 15 Amps GP series. 125 Volts 20 Amps GT series.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*

Mersen plug fuses are intended for industrial and residential applications. Non time-delay fuses are available for receptacle and lighting circuits and time-delay fuses for motor loads. For Canadian requirements, a type P fuse is used for non-motor loads and Type D, for electrical heating and cyclical load circuits. Both fuses have low melting-point temperature elements. Type S plug fuses are time-delay and tamper resistant. 125 Volts 15 Amps GP series. 125 Volts 25 Amps GW series.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*

Mersen plug fuses are intended for industrial and residential applications. Non time-delay fuses are available for receptacle and lighting circuits and time-delay fuses for motor loads. For Canadian requirements, a type ",P", fuse is used for non-motor loads and Type ",D", for electrical heating and cyclical load circuits. Both fuses have low melting-point temperature elements. Type ",S", plug fuses are time-delay and tamper resistant. 1500 Volts 3.2 Amps SAG series.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Fuse Block 600VAC 600VDC Class CC 30A 1/4in Quick Connect / Solder 90 angle Water-tight Screw Knob Panel Mount
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*