Showing 3637-3648 of 452,163 results

Contact for Pricing

ABB - Installation Products · Steel City
HO225-1
Nipples, 3/4 Inch Offset, Conduit Size 1-1/2 Inch, Length 2.88 Inches, Opening Diameter 2.08 Inch, Die Cast Zinc, Pack of 50
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*

ABB - Installation Products · STA-KON
F73
Non-Insulated Large Brazed Seam Ring Terminal, Length 1.35 Inches, Width .60 Inches, Bolt Hole 3/8 Inch, Wire Range #4 AWG, Copper, Tin Plated, 200 Pack
Contact for Pricing
Minimum Qty: 200
Multiplier: 200
*Contact for lower quantities*

ABB - Installation Products · COLOR-KEYED
MDBOOT-2
KUBE 600kV Insulator Boot for Disconnect Series MD-M and MD-F, Insulates Body Size 2, Black Thermoplastic Rubber
Contact for Pricing

Contact for Pricing

ABB - Installation Products · RUSSELL STOLL
DS2204MP00K
Male Plug, Voltage 480V, Amperage 200A, 2 Poles 3 Wire, with Screw Cap and 2 Control Contacts
Contact for Pricing

ABB - Installation Products · Sta-Kon
EE2
Non-Insulated Butt Splice, Length 1.12 Inches, Width 0.307 Inch, Wire Range 6 AWG, Copper, Tin Plated, 200 Pack
Contact for Pricing
Minimum Qty: 200
Multiplier: 200
*Contact for lower quantities*

ABB - Installation Products · RUSSELL STOLL
DSC20
MaxGard Replacement Screw Cap Assembly Watertight, 200 Amp
Contact for Pricing

ABB - Installation Products · PMA
PCSG-36B.30
Coarse Profile Heavy Wall Very Flexible Black Conduit, (PCS) Material - Polyamide 12, Conduit Size NW - 36, 30 Meters
Contact for Pricing

ABB - Installation Products · PMA
NVNV-M409-8
PMAFIX Straight Black Connector with Metric Threads, Connector Material - Polyamide 6, Thread Material - Nickel Plated Brass, Thread Size - M40x1.5, Thread Length - 8, Conduit Size NW - 29
Contact for Pricing

CDP312R Control panel option. Requires additional mounting platform and SDCS-Com-8x drive interface card.
Contact for Pricing

The Digital I/O Extension module offers three digital inputs (24…250 VDC or 110…230 VAC) and two relay outputs (1250 VA/250 VAC or 5 A/24 VDC). The isolation voltage between the digital inputs, digital outputs and power supply is 2.5 kV (1.5 kV between DI2 and DI3). This option uses 30 mA of the available 250 mA power supply.
Contact for Pricing