Showing 1993-2004 of 452,166 results

Contact for Pricing

SolaHD
EE2H30S
SolaHD, Ventilated Distribution Transformer, DOE 10 Cfr P431 - DOE 2016 Compliant, Ul Listed E25872, 30 KVA, Primary Voltage 480 V, Secondary Voltage 208 V, 60 HZ, 3 Phase, Number Of Taps 7, Temperature Rating 150 Degrees C, Connection Delta-Wye, Winding Aluminium, Enclosure Nema Type 1
Contact for Pricing

Mini-ChangeĀ® A-Size Receptacle, 3 Poles, 1/2" - 14 NPT Threads, Female (Straight) to 16 AWG Leads, 0.305m (1.0') Length
Contact for Pricing
Minimum Qty: 4
Multiplier: 1
*Contact for lower quantities*

Contact for Pricing

Contact for Pricing

Contact for Pricing

Braking Resistor, 8.06 OHMS, 5119 WATTS, GCE9 Enclosure, 26.5W x 10D x 5H in, 24 lbs
Contact for Pricing

The three phase field supply converters DCS800-S01 and -S02 drives need a separate active over voltage protection for proper operation on the inductive load of a motor field. This unit will protect the drive against inadmissible high voltages. The DCF506-0140 is to be used with -0020-05 through -0140-05 units.
Contact for Pricing

MACHINERY DRIVE, Product Family: ACS850, Horsepower: 60 HP, Output Current: 90 A, Voltage: 480 VAC, Voltage Range: 380-500V, UL TYPE OPEN (IP20), Mounting: Cabinet-mounted (Side-by-Side), Control Unit Cover with Drive Mount Control Panel, Standard Control Program Version UIFI2020, 3-Phase Input, 3-Phase Output, Frame: D, Product HxWxD: 22.3 in x 8.7 in x 11.8 in, Product Weight: 51 lbs
Contact for Pricing

Externally mounted, half controlled 3-phase field exciter, with single quadrant operation. This field supply is current regulated with a max output current of 35 amps. With 1-phase input, an autotransformer is recommended for voltage adaptation. An input line reactor is required when supply voltage is over 400 Vac. Fuses are always required. DSL communication cable is required. Communication to the converter unit is required via the SDC-DSL-4 board, standard in D5-D7 and all drives 600 Vdc or greater, otherwise optional.
Contact for Pricing

DRIVE CFW500B24P0T4DB66DSG2 WEG specifications: Power supply 380-480 V; Input phases Three-phase; Configuration With options; Rated current (HD) 24 A; RFI filter Without filter; Enclosure IP66; Dynamic braking Standard with braking; Safety Stop Prepared to install the accessory CFW500-SFY2
Contact for Pricing

CompleTech
CA420Y+++++
directional yagi - Frequency range: 405-440 MHz - Gain: 13 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 173 N
Contact for Pricing