Accessories

    Office Equipment and Accessories and Supplies

    Drives, Servos, and Motors

    Power Generation and Distribution Machinery and Accessories

    Structures, Building, and Construction

    Enclosures, Fans, and Environmental Controls

    Information Technology Broadcasting and Telecommunications

    Electronic Components And Supplies

    Safety Equipment and Supplies

    Tools and General Machinery

    Manufacturing Components and Supplies

    Distribution and Conditioning Systems and Equipment and Components

    Material Handling and Conditioning and Storage Machinery and their Accessories and Supplies

    Electrical Systems and Lighting and Components and Accessories and Supplies

    Laboratory and Measuring and Observing and Testing Equipment

    Industrial Manufacturing and Processing Machinery and Accessories

    Miscellaneous

Showing 9049-9060 of 452,171 results

NSI Industries VM-C-48 - Voltage Marker Card Danger High Voltage, 12ea. .5x2.25"
NSI Industries · NSI · Wire Management

VM-C-48


Voltage Marker Card Danger High Voltage, 12ea. .5x2.25"

Contact for Pricing

NSI Industries VM-A-49 - Voltage Markers 24 Volts, 1ea. 9x2.25"
NSI Industries · NSI · Wire Management

VM-A-49


Voltage Markers 24 Volts, 1ea. 9x2.25"

Contact for Pricing

NSI Industries CL - Large Power Distribution Block Cover Large power distribution block covers are see through, clear acrylic covers to permit visual inspection. Snaps easily into place. For use with connector blocks series with prefix AL.
NSI Industries · Polaris · Connector Blocks

CL


Large Power Distribution Block Cover Large power distribution block covers are see through, clear acrylic covers to permit visual inspection. Snaps easily into place. For use with connector blocks series with prefix AL.

Contact for Pricing

NSI Industries CD2 - U-Type Compression Die - Blue 6 AWG Copper - 8 AWG Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.
NSI Industries · NSI · Tools

CD2


U-Type Compression Die - Blue 6 AWG Copper - 8 AWG Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.

Contact for Pricing

NSI Industries FS004 - Flexible Sleeve .291 Id, 50 Per Pack
NSI Industries · Polaris · Hardware & Misc.

FS004


Flexible Sleeve .291 Id, 50 Per Pack

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

NSI Industries IPL750-4 - POLARIS 750 Multi-Tap Black Insulated Connector with 4 Conductors and One Side Wire Entry. Rated for 750-250 MCM, 90 degree C and 600V.
NSI Industries · Polaris · Polaris Black

IPL750-4


POLARIS 750 Multi-Tap Black Insulated Connector with 4 Conductors and One Side Wire Entry. Rated for 750-250 MCM, 90 degree C and 600V.

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

NSI Industries 79200MS - NSI's NO/NC SPDT Magnetic Reed Switch is a Single-Pole, Double-Throw switch. It draws no power while in the closed position, but when the magnet is applied, the common reed swings from the normally closed state to the normally open contact. When the magnet is removed, the reed contact moves back to the normally closed contact.
NSI Industries · NSI · Switches

79200MS


NSI's NO/NC SPDT Magnetic Reed Switch is a Single-Pole, Double-Throw switch. It draws no power while in the closed position, but when the magnet is applied, the common reed swings from the normally closed state to the normally open contact. When the magnet is removed, the reed contact moves back to the normally closed contact.

Contact for Pricing

NSI Industries IPLD500-6 - The Polaris IPLD500-6 Multi-Tap Dual-Sided Entry Connector features 6 ports sized for 500 MCM - 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLD500-6


The Polaris IPLD500-6 Multi-Tap Dual-Sided Entry Connector features 6 ports sized for 500 MCM - 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

NSI Industries ISR-1/0 - The Polaris ISR-1/0 Multi-Tap In-Line Entry Connector features 2 ports sized for 1/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

ISR-1/0


The Polaris ISR-1/0 Multi-Tap In-Line Entry Connector features 2 ports sized for 1/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 4

Multiplier: 4

*Contact for lower quantities*

NSI Industries ISR-250 - The Polaris ISR-250 Multi-Tap In-Line Entry Connector features 2 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

ISR-250


The Polaris ISR-250 Multi-Tap In-Line Entry Connector features 2 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 4

Multiplier: 4

*Contact for lower quantities*

NSI Industries NMS-2 - Non Metallic Splice Kit 12-14 AWG for 2 Conductors with Ground Non Metallic Splice Kits are used for splicing 12 or 14 AWG solid conductor, 2-conductor cable with ground. Hinged cover makes termination fast and easy. Approved for use in a variety of applications including: residential branch circuits, manufactured housing and pre-fabricated building structures.
NSI Industries · Polaris · Easy-Splice

NMS-2


Non Metallic Splice Kit 12-14 AWG for 2 Conductors with Ground Non Metallic Splice Kits are used for splicing 12 or 14 AWG solid conductor, 2-conductor cable with ground. Hinged cover makes termination fast and easy. Approved for use in a variety of applications including: residential branch circuits, manufactured housing and pre-fabricated building structures.

Contact for Pricing

NSI Industries NMT-2 - Non Metallic Splice and Tap Kit 12-14 AWG for 2 Conductors with Ground Non Metallic Splice and Tap Kits are used for tapping into 12 or 14 AWG solid conductor, 2-conductor cable with ground. Approved for use in a variety of applications including: residential branch circuits, manufactured housing and pre-fabricated building structures.
NSI Industries · Polaris · Easy-Splice

NMT-2


Non Metallic Splice and Tap Kit 12-14 AWG for 2 Conductors with Ground Non Metallic Splice and Tap Kits are used for tapping into 12 or 14 AWG solid conductor, 2-conductor cable with ground. Approved for use in a variety of applications including: residential branch circuits, manufactured housing and pre-fabricated building structures.

Contact for Pricing

Showing 9049-9060 of 452,171 results