Showing 9853-9864 of 452,163 results

CABINET DRIVE, Product Family: ACS880, Horsepower: 350 HP, Output Current: 393 A, Voltage: 480 VAC, UL TYPE 12 (IP54), Mounting: Floor-mounted, Local or Remote Mounted LCD Display and Keypad, Bottom Cable Entry, Bottom Cable Exit, 3-Phase Input, 3-Phase Output, Frame: R9, Product HxWxD: 91.2 in x 32.7 in x 27.5 in, Product Weight: 825 lbs
Contact for Pricing

CABINET DRIVE, Product Family: ACS880, Horsepower: 300 HP, Output Current: 361 A, Voltage: 480 VAC, UL TYPE 12 (IP54), Mounting: Floor-mounted, Local or Remote Mounted LCD Display and Keypad, Bottom Cable Entry, Bottom Cable Exit, 3-Phase Input, 3-Phase Output, Frame: R9, Product HxWxD: 91.2 in x 32.7 in x 27.5 in, Product Weight: 825 lbs
Contact for Pricing

The FEA 01 DIN-rail extension adapter is required for mounting the FEN-21 to the back panel. FEA 01 converts the signal to fiber optics which is connected to channel 1 of the DCS800's COM-8x board. ALSO REQUIRED: Fiber optic cable, SDCS-COM-8x.
Contact for Pricing

ACS880 AC Drive, 3-380-500V In, 350HP, 414A, Type 1, 1.1 overload, Assistant Bluetooth, HxWxD 84.45x32.68x27.48 in, Cabinet, UL approved components, Braking chopper type 1, Absolute encoder
Contact for Pricing

The FECA-01 EtherCAT adapter module enables connection of a drive to an EtherCAT network. The module is classified as a complex slave device. FECA-01 supports the CANopen application layer over EtherCAT (CoE), which provides the familiar CANopen communication mechanisms: Service Data Objects (SDO), Process Data Objects (PDO) and network management similar to the CANopen protocol.
Contact for Pricing

The FSCA 01 RS-485 Adapter Module supports the Modbus/RTU network protocol. Modbus/RTU is a variant of the Modbus family of simple, vendor neutral communication protocols intended for supervision and control of automation equipment. The Modbus/RTU implementation in the FSCA 01 RS-485 Adapter Module is done according to Modbus Application Protocol Specification v1.1b
Contact for Pricing

Analog I/O extension module FIO-11 has three bi-polar current (-20 to +20 mA) or bi-polar voltage (-10 to +10 V) inputs and one uni-polar current (0(4) to 20 mA) output. It also has two 24 VDC digital input/outputs (configurable either as a 50 mA source or 50 mA sink). Analog inputs are 16 bit resolution, outputs are 12 bit. Analog and digital I/O are galvanically isolated as a group, from each other and from the power supply.
Contact for Pricing

The FDCO 01 module includes the connectors for fiber optic DDCS channels CH0 and CH1. The usage of these channels is determined by the application but are normally assigned to the following: CH0 - overriding system (e.g. AC80M) - 10 MBd, CH1 - master/follower link - 10 MBd.
Contact for Pricing

The optional auxiliary power module provides auxiliary voltage to the control panel, fieldbus, and I/O.
Contact for Pricing

ACS880 AC Drive, 3-380-500V In, 125HP, 156A, Type 12, 1.1 overload, Assistant Bluetooth, HxWxD 91.14x16.93x26.5 in, Cabinet, UL approved components, Cabinet lighting
Contact for Pricing

ACS255 AC Drive, 3-500-600V In, 5HP, 6.5A, Type OPEN, 1.5 overload, Integrated, HxWxD 8.7x4.45x7.28 in, Module
Contact for Pricing

ACS380 AC Drive, 3-110-120V In, 3HP, 11.6A, Type OPEN, 1.1 overload, Integrated, HxWxD 6.69x3.74x7.52 in, Module, PROFIBUS DP
Contact for Pricing