Showing 9817-9828 of 452,171 results

ACS880 AC Drive, 3-380-500V In, 300HP, 361A, Type 1, 1.1 overload, Assistant Bluetooth, HxWxD 37.6x14.96x16.26 in, Wall, EMC/RFI-filters, 2nd Environment, Unrestricted (Earthed Network)
Contact for Pricing

ACS880 AC Drive, 3-380-500V In, 250HP, 302A, Type 1, 1.1 overload, Assistant Bluetooth, HxWxD 37.6x14.96x16.26 in, Wall, Braking chopper type 1, Pulse encoder
Contact for Pricing

ACS880 AC Drive, 3-380-500V In, 350HP, 414A, Type 1, 1.1 overload, Assistant Bluetooth, HxWxD 84.45x32.68x27.48 in, Cabinet, UL approved components, Braking chopper type 1
Contact for Pricing

ACS880 AC Drive, 3-380-500V In, 150HP, 180A, Type 1, 1.1 overload, Assistant Bluetooth, HxWxD 34.65x11.18x14.37 in, Wall, Braking chopper type 1, Pulse encoder
Contact for Pricing

ACS880 AC Drive, 3-380-500V In, 125HP, 156A, Type 1, 1.1 overload, Assistant Bluetooth, HxWxD 34.65x11.18x14.37 in, Wall, EMC/RFI-filters, 2nd Environment, Unrestricted (Earthed Network)
Contact for Pricing

CABINET DRIVE, Product Family: ACS880, Horsepower: 350 HP, Output Current: 393 A, Voltage: 480 VAC, UL TYPE 12 (IP54), Mounting: Floor-mounted, Local or Remote Mounted LCD Display and Keypad, Bottom Cable Entry, Bottom Cable Exit, 3-Phase Input, 3-Phase Output, Frame: R9, Product HxWxD: 91.2 in x 32.7 in x 27.5 in, Product Weight: 825 lbs
Contact for Pricing

CABINET DRIVE, Product Family: ACS880, Horsepower: 300 HP, Output Current: 361 A, Voltage: 480 VAC, UL TYPE 12 (IP54), Mounting: Floor-mounted, Local or Remote Mounted LCD Display and Keypad, Bottom Cable Entry, Bottom Cable Exit, 3-Phase Input, 3-Phase Output, Frame: R9, Product HxWxD: 91.2 in x 32.7 in x 27.5 in, Product Weight: 825 lbs
Contact for Pricing

The FEA 01 DIN-rail extension adapter is required for mounting the FEN-21 to the back panel. FEA 01 converts the signal to fiber optics which is connected to channel 1 of the DCS800's COM-8x board. ALSO REQUIRED: Fiber optic cable, SDCS-COM-8x.
Contact for Pricing

ACS880 AC Drive, 3-380-500V In, 350HP, 414A, Type 1, 1.1 overload, Assistant Bluetooth, HxWxD 84.45x32.68x27.48 in, Cabinet, UL approved components, Braking chopper type 1, Absolute encoder
Contact for Pricing

The FECA-01 EtherCAT adapter module enables connection of a drive to an EtherCAT network. The module is classified as a complex slave device. FECA-01 supports the CANopen application layer over EtherCAT (CoE), which provides the familiar CANopen communication mechanisms: Service Data Objects (SDO), Process Data Objects (PDO) and network management similar to the CANopen protocol.
Contact for Pricing

The FSCA 01 RS-485 Adapter Module supports the Modbus/RTU network protocol. Modbus/RTU is a variant of the Modbus family of simple, vendor neutral communication protocols intended for supervision and control of automation equipment. The Modbus/RTU implementation in the FSCA 01 RS-485 Adapter Module is done according to Modbus Application Protocol Specification v1.1b
Contact for Pricing

Analog I/O extension module FIO-11 has three bi-polar current (-20 to +20 mA) or bi-polar voltage (-10 to +10 V) inputs and one uni-polar current (0(4) to 20 mA) output. It also has two 24 VDC digital input/outputs (configurable either as a 50 mA source or 50 mA sink). Analog inputs are 16 bit resolution, outputs are 12 bit. Analog and digital I/O are galvanically isolated as a group, from each other and from the power supply.
Contact for Pricing