Showing 3733-3744 of 452,163 results

CDP312R Control panel option. Requires additional mounting platform and SDCS-Com-8x drive interface card.
Contact for Pricing

The Digital I/O Extension module offers three digital inputs (24…250 VDC or 110…230 VAC) and two relay outputs (1250 VA/250 VAC or 5 A/24 VDC). The isolation voltage between the digital inputs, digital outputs and power supply is 2.5 kV (1.5 kV between DI2 and DI3). This option uses 30 mA of the available 250 mA power supply.
Contact for Pricing

Federal Signal
EZ1-SM
Echo Station with keypad and stubby microphone. ATEX certified ExII2GEExmeibIICT6 for Zone 1 hazardous areas.
Contact for Pricing

Contact for Pricing

Contact for Pricing

For use with Littelfuse FLNR_ID/FLSR_ID, IDSR, LLNRK/LLSRK and KLNR/KLSR series fuses.
Contact for Pricing

Contact for Pricing

250V Fast Acting Ceramic Body 5mm x 20mm 250 Volts 8 Amps GSD (bulk packaging) series.
Contact for Pricing

Contact for Pricing

Mersen plug fuses are intended for industrial and residential applications. Non time-delay fuses are available for receptacle and lighting circuits and time-delay fuses for motor loads. For Canadian requirements, a type P fuse is used for non-motor loads and Type D, for electrical heating and cyclical load circuits. Both fuses have low melting-point temperature elements. Type S plug fuses are time-delay and tamper resistant. 125 Volts 15 Amps GP series. 125 Volts 20 Amps GT series.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*

Mersen plug fuses are intended for industrial and residential applications. Non time-delay fuses are available for receptacle and lighting circuits and time-delay fuses for motor loads. For Canadian requirements, a type P fuse is used for non-motor loads and Type D, for electrical heating and cyclical load circuits. Both fuses have low melting-point temperature elements. Type S plug fuses are time-delay and tamper resistant. 125 Volts 15 Amps GP series. 125 Volts 25 Amps GW series.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*

Mersen plug fuses are intended for industrial and residential applications. Non time-delay fuses are available for receptacle and lighting circuits and time-delay fuses for motor loads. For Canadian requirements, a type ",P", fuse is used for non-motor loads and Type ",D", for electrical heating and cyclical load circuits. Both fuses have low melting-point temperature elements. Type ",S", plug fuses are time-delay and tamper resistant. 1500 Volts 3.2 Amps SAG series.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*