Showing 1873-1884 of 452,163 results

nVent · nVent HOFFMAN
A24R248HCR
Medium Drip-Shield Hinged-Cover Type 3R, 24.00x24.00x8.00, Gray, Steel
Contact for Pricing

Contact for Pricing

Contact for Pricing

NSI Industries · Polaris · Polaris Black
IPLD2-3
The Polaris IPLD2-3 Multi-Tap Dual-Sided Entry Black Connector features 3 ports sized for 2 AWG - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 8
Multiplier: 8
*Contact for lower quantities*

ACS880 AC Drive, 3-525-690V In, 800HP, 791A, Type OPEN, 1.1 overload, Assistant Bluetooth, HxWxD 60.67x27.56x19.92 in, Parallel Module
Contact for Pricing

Braking Resistor, 4 OHMS, 5600 WATTS, GCE9 Enclosure, 26.5W x 10D x 5H in, 26 lbs
Contact for Pricing

DCS880 DC Drive, 3-400-525 In, 30, 49A, Type OPEN, 1.1 overload, Local or Remote Mounted LCD Display and Keypad, HxWxD 14.57x10.63x8.46 in, Wall
Contact for Pricing

NSI Industries · PowerGRP
GRP-6500
The PowerGRP GRP-6500 100-Count Resealable Pack of Type 21S AH-2 Black-Colored General-Purpose Cable Ties are 6†long, with 50lb of tensile strength for professional applications. They’re made from polyamide 6,6 nylon, resulting in a high mechanical strength and a wide temperature range (-40 F to 185 F). Fasten these 6†cables ties around a wide range of equipment with a bundle diameter between .12†(3mm) and 1.5†(38mm), using the bent tips and serrated locking mechanism to form an effortless and secure grip. Designed for cable management in industrial applications and use in plenum spaces.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Micro-Change® (M12) Single Keyway with PG7 Cable Fitting, Straight Female, 4 Poles, Cable Diameter 3.30 - 6.60mm
Contact for Pricing
Minimum Qty: 4
Multiplier: 1
*Contact for lower quantities*

D-Sub Connector with Diagnostics LEDs and Programming Port, 90° Angle
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

DCPT-01 (single user licence); Drive composer pro PC tool Win7/32 and 64-bit - Win10/32 and 64-bit
Contact for Pricing

The FENA 01 module supports Three protocols Modbus-TCP, EtherNet/IP, and the PROFInet IO RT network. The Modbus-TCP protocol is simply the Modbus protocol used on top of Ethernet-TCP/IP. Modbus-TCP is an open Industrial Ethernet network which has been specified by the Modbus-IDA User Organization. EtherNet/IP is based on the Common Industrial Protocol (CIP), which is also the framework for both the ControlNet and DeviceNet network protocols. PROFInet IO RT is an open network based on the PI Organization standard. The FENA-11 supports 10/100 Mbps transfer rate with network connections made with CAT 5 wiring and RJ-45 connectors. Both star and bus topology options are supported.
Contact for Pricing