Showing 5257-5268 of 452,163 results

ABB - Electrification · GE · GE Industrial Solution
TMPBB16RST
METERMOD,1PH,1600A,100K,BOT,SHUNT MCB
Contact for Pricing

ABB - Electrification · GE · GE Industrial Solution
TM20ECD
Load Centers. Auburn Parts. Load Center & Enclosure Renewal Part. 0ECD9000
Contact for Pricing

ABB - Electrification · GE
CR123C131A
Maximum Motor Full-Load Amperes: 1.33. All CR123C and 123F heaters are packaged three to a carton. Items of these heaters, being ordered for either customer's stock or any other purpose, are to be specified in multiples of three (such as 3, 6, 9, 12, 15, etc.). Minimum order quantity is three.
Contact for Pricing

ABB - Electrification · GE · GE Industrial Solution
CR305L002
Contactors, NEMA, Full Voltage, Non-Reversing, NEMA Size: 2, Maximum Voltage: 600 VAC, Amp Rating: 50 Amp, Horsepower Rating: 3 @ 115 VAC, Coil Voltage: 115 VAC @ 60 Hz, Enclosure Type: Open Type, Dimensions: 5.44 Inch W x 6 Inch H x 5.50 Inch D, Features: Supplied with 1 Normally Open Auxiliary Contact
Contact for Pricing

Contact for Pricing

NSI Industries · Polaris · Polaris Black
IPLD2-5
The Polaris IPLD2-5 Multi-Tap Dual-Sided Entry Black Connector features 5 ports sized for 2 AWG - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

Slotted and Phillips Stove Bolt, 1-1/2 in. length, 3/8 in. diameter, Round head, Steel, Zinc Chromate finish, 16 thread pitch/thread per inch, 100 per pack
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Self Drilling Screw Kit, #8, #10 Size, 380 piece(s), Steel material, Pan head, Square drive type, Zinc finish, Self Drill Point, including a(n) (100) #8 x 1/2 in., (60) #8 x 3/4 in., (50) #8 x 1 in. Pan Square Self Drilling Screws and (80) #10 x 1/2 in., (50) #10 x 3/4 in., (40) #10 x 1 in. Pan Square Self Drilling Screws and (1) #2 x 2 in. Square Drive Power Bit - 100R2B
Contact for Pricing

Sheet Metal Screw, Self Piercing, #8 size, #8 driver size, 1/4 in. head width, Hex head, Steel, Slotted drive type, Zinc Chromate finish, 1/2 in. length, 1000 per pack. For use with MT208B Chuck.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

#10 x 4 Bugle Head Square Drive Type 17 Point Deck All Weather Coating Zinc u/m 500
Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

Jack Chain, #14, 1/4 in. size, 16 lb. working load limit, Steel, Galvanized finish, 100 ft. per box
Contact for Pricing

1/2 x 3/4 Conduit Drive Strap Flat Stamped Galvanized 100 per pack
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*