Showing 2221-2232 of 452,166 results

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

AUTOMOTIVE MAXI SLO-BLO BLADE 80A. With “Diffusion Pill Technology” the MAXI™ Fuse provides excellent time delay characteristics and low heat dissipation. Designed and patented by Littelfuse, the MAXI™ Fuse is ideal for motor powered applications which have large inrush currents.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

SolaHD
SDU2024
SDU 20-24 DIN Rail DC UPS power module, 24 Vdc / 20 A, 480 VA. Battery module required: SDU 24-BAT (DIN rail/panel mount, up to 4) or SDU 24-BATEM (external mount, 1 only) - one model only, not combined. Designed for use with SolaHD SDN Series 24 Vdc power supplies. Features: 16 to 12 AWG wire range, -20 to 50 DEG C operating temperature. Standards: UL (Canada and US), UL E61379, UL 508, CE: IEC/EN 60950-1. Optional: SDU24EXTBC6 6 ft battery cable, SDU 24-DB9 interface kit, SDU-PMBRK mounting brackets.
Contact for Pricing

0215 SLO-BLO CERAMIC FUSE H-PACK .250A. The 215 series is 5x20, Ceramic body, Time-Lag type Cartridge fuse. With the extension into higher current ratings beyond existing 12A, from 15A up to 25A in cartridge version, in particular for 20A and 25A, it offers designers better flexibility in circuit protection design for high current applications.The 215 Series has remarkable interrupting capability at operating voltage of 250VAC. In addition, it can be used in AC applications, and it provides a smaller footprint of 5 x 20mm as compared to 6.3 x 32mm for same applications. Features: Offer high ampere ratings Provide remarkable interrupting capacity UL agency approval. Applications: Primary and Secondary protection for White Goods, UPS/Power Supplies, High current applications.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

NSI Industries · RHINO Safety
SG-103G
The RHINO Safety SG-103G Safety Glasses feature gray polycarbonate lenses in a comfortable Hytrel and EVA foam frame designed to be impact-resistant and offer increased protection. The gray lenses are designed for UV protection in outdoor applications and built to be both impact- and scratch-resistant. These glasses have all the durability needed to survive your jobsite and a comfortable wraparound design to fit most heads, with EVA foam pads to maintain a cushioned grip.
Contact for Pricing

NSI Industries · NSI · Wire Management
WMC--
Wire Marker Card (-) vinyl impregnated cloth markers 1.5" long
Contact for Pricing

NSI Industries · Polaris · Polaris Grey
ITG-6B
The Polaris ITG-6B Grey Multi-Tap Single Side Entry Connector features 2 ports sized for 6 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires and pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
Contact for Pricing

Contact for Pricing

Contact for Pricing

Self-Drilling & Tapping Drywall Screw, Steel material, #8 Size, 3 in. length, Fine thread type, Bugle head, Zinc finish, Phillips drive, Self Drill Point, 100 per pack, #2 bit size. For use with 12 Gauge Steel Stud.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Contact for Pricing