All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 85-96 of 800 results

NSI Industries F12-250-3V-BULK - 12-10 AWG Vinyl Insulated Female Disc .250X.032 Tab, Bulk
NSI Industries · NSI · Miniterms

F12-250-3V-BULK


12-10 AWG Vinyl Insulated Female Disc .250X.032 Tab, Bulk

Contact for Pricing

Minimum Qty: 500

Multiplier: 500

*Contact for lower quantities*

NSI Industries B12-V-BULK - 12-10 AWG Vinyl Insulated Butt Splice, Bulk
NSI Industries · NSI · Miniterms

B12-V-BULK


12-10 AWG Vinyl Insulated Butt Splice, Bulk

Contact for Pricing

Minimum Qty: 500

Multiplier: 500

*Contact for lower quantities*

NSI Industries S12-14V-P - 12-10 AWG Vinyl Insulated Spade Terminal 1/4" Stud Vinyl spade terminals have an open tongue end for rapid insertion on the mounting screw. Typically used on free-standing studs. Vinyl insulated spade terminals are made of tin-plated copper, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 40 Count WIRE SIZE: 12-10 AWG STUD SIZE: 1/4" LENGTH: 1.103 WIDTH: 0.375
NSI Industries · NSI · Miniterms

S12-14V-P


12-10 AWG Vinyl Insulated Spade Terminal 1/4" Stud Vinyl spade terminals have an open tongue end for rapid insertion on the mounting screw. Typically used on free-standing studs. Vinyl insulated spade terminals are made of tin-plated copper, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 40 Count WIRE SIZE: 12-10 AWG STUD SIZE: 1/4" LENGTH: 1.103 WIDTH: 0.375

Contact for Pricing

Minimum Qty: 40

Multiplier: 40

*Contact for lower quantities*

NSI Industries S16-8V-P - 16-14 AWG Vinyl Insulated Spade Terminal #8 Stud Vinyl insulated spade terminals have an open tongue end for rapid insertion on the mounting screw. Typically used on free-standing studs. Vinyl insulated spade terminals are made of electro tin-plated copper, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 85 Count WIRE SIZE: 16-14 AWG STUD SIZE: 8 LENGTH: 1.103 WIDTH: 0.388
NSI Industries · NSI · Miniterms

S16-8V-P


16-14 AWG Vinyl Insulated Spade Terminal #8 Stud Vinyl insulated spade terminals have an open tongue end for rapid insertion on the mounting screw. Typically used on free-standing studs. Vinyl insulated spade terminals are made of electro tin-plated copper, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 85 Count WIRE SIZE: 16-14 AWG STUD SIZE: 8 LENGTH: 1.103 WIDTH: 0.388

Contact for Pricing

Minimum Qty: 85

Multiplier: 85

*Contact for lower quantities*

ABB - Installation Products BD14-182 - Non-Insulated Female Disconnect, Length .64 Inches, Width .23 Inches, Tab Size .187x.020, Wire Range #16-#14 AWG, Copper, Tin Plated
ABB - Installation Products · STA-KON

BD14-182


Non-Insulated Female Disconnect, Length .64 Inches, Width .23 Inches, Tab Size .187x.020, Wire Range #16-#14 AWG, Copper, Tin Plated

Contact for Pricing

Minimum Qty: 1000

Multiplier: 1000

*Contact for lower quantities*

ABB - Installation Products RA257M - Vinyl-Insulated Female Disconnect, Length .96 Inches, Width .29 Inches, Maximum Insulation .150, Tab Size .250x.032, Wire Range #22-#18 AWG, Color Red, Copper, Tin Plated, On Mylar Tape, 1,000 Pack
ABB - Installation Products · STA-KON

RA257M


Vinyl-Insulated Female Disconnect, Length .96 Inches, Width .29 Inches, Maximum Insulation .150, Tab Size .250x.032, Wire Range #22-#18 AWG, Color Red, Copper, Tin Plated, On Mylar Tape, 1,000 Pack

Contact for Pricing

Minimum Qty: 1000

Multiplier: 1000

*Contact for lower quantities*

ABB - Installation Products RA2573 - Nylon Fully Insulated Female Disconnect, Length 1.01 Inches, Width .38 Inches, Maximum Insulation .165, Tab Size .250x.032, Wire Range #22-#18 AWG, Color Red, Brass, Tin Plated, 1,000 Pack
ABB - Installation Products · STA-KON

RA2573


Nylon Fully Insulated Female Disconnect, Length 1.01 Inches, Width .38 Inches, Maximum Insulation .165, Tab Size .250x.032, Wire Range #22-#18 AWG, Color Red, Brass, Tin Plated, 1,000 Pack

Contact for Pricing

Minimum Qty: 1000

Multiplier: 1000

*Contact for lower quantities*

ABB - Installation Products C10-250A - Non-Insulated 90 Degree Flag Female Disconnect, Length .64 Inches, Width .63 Inches, Tab Size .250x.032, Wire Range #12-#10 AWG, Copper, Tin Plated
ABB - Installation Products · Sta-Kon

C10-250A


Non-Insulated 90 Degree Flag Female Disconnect, Length .64 Inches, Width .63 Inches, Tab Size .250x.032, Wire Range #12-#10 AWG, Copper, Tin Plated

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

NSI Industries R22-8V-S - 22-18 AWG Vinyl Insulated Ring Terminal #8 Stud Vinyl ring terminals are basic tongue ring terminals. Safe and reliable connections because it cannot be disconnected unless the screw is completely removed. Vinyl insulated ring terminals are made of tin-plated copper with brazed seam, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 25 Count WIRE SIZE: 22-18 AWG STUD SIZE: 8 LENGTH: 0.826 WIDTH: 0.314 BRAND EQUIVALENT: Morris Products 01014 Penn Union R4A8 Ilsco 44202-B10
NSI Industries · NSI · Miniterms

R22-8V-S


22-18 AWG Vinyl Insulated Ring Terminal #8 Stud Vinyl ring terminals are basic tongue ring terminals. Safe and reliable connections because it cannot be disconnected unless the screw is completely removed. Vinyl insulated ring terminals are made of tin-plated copper with brazed seam, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 25 Count WIRE SIZE: 22-18 AWG STUD SIZE: 8 LENGTH: 0.826 WIDTH: 0.314 BRAND EQUIVALENT: Morris Products 01014 Penn Union R4A8 Ilsco 44202-B10

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

NSI Industries S12-6V-S - Tin-plated Copper Spade terminal is insulated with vinyl and has an open tongue end for rapid insertion on the mounting screw. Used for wire termination in applications with #6 Stud and 12-10 AWG.
NSI Industries · NSI · Miniterms

S12-6V-S


Tin-plated Copper Spade terminal is insulated with vinyl and has an open tongue end for rapid insertion on the mounting screw. Used for wire termination in applications with #6 Stud and 12-10 AWG.

Contact for Pricing

Minimum Qty: 15

Multiplier: 15

*Contact for lower quantities*

NSI Industries S12-6V - Tin-plated Copper Spade terminal is insulated with vinyl and has an open tongue end for rapid insertion on the mounting screw. Used for wire termination in applications with #6 Stud and 12-10 AWG.
NSI Industries · NSI · Miniterms

S12-6V


Tin-plated Copper Spade terminal is insulated with vinyl and has an open tongue end for rapid insertion on the mounting screw. Used for wire termination in applications with #6 Stud and 12-10 AWG.

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

NSI Industries R8-38N - 8 AWG Nylon Insulated Ring 3/8" Stud, 25 Per Pack
NSI Industries · NSI · Miniterms

R8-38N


8 AWG Nylon Insulated Ring 3/8" Stud, 25 Per Pack

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Showing 85-96 of 800 results