Showing 3877-3888 of 19,234 results

Panduit
FRDDS6X4LYL
The FiberRunner 6x4 Dual Downspout attaches to a 6x4 channel and/or fitting to create two 90 4x4 downward transitions from a horizontal run. The fitting maintains a 2 inch bend radius control throughout the transition to the vertical downspouts. It includes two snap-on throat covers for the dual downspouts.
Contact for Pricing
Minimum Qty: 5
Multiplier: 1
*Contact for lower quantities*

Panduit
FROVRA4X4LYL
The FiberRunner 4x4 Outside Vertical creates a 90 vertical turn down from a straight horizontal run. It is used with inside vertical 90 angle fitting FRIVRA4X4LYL to change the level of a straight horizontal run.
Contact for Pricing
Minimum Qty: 5
Multiplier: 1
*Contact for lower quantities*

Panduit
FROVRASC4LYL
The FiberRunner 4x4 Outside Vertical Right-Angle Cover creates openings for easy access to add or remove cables.
Contact for Pricing
Minimum Qty: 5
Multiplier: 1
*Contact for lower quantities*

Panduit
FROV456X4LYL
The FiberRunner 6x4 Outside Vertical creates a 45 downward angle from a horizontal run. It is used with inside vertical 45 angle fitting FRIV456X4LYL to change the level of a horizontal run.
Contact for Pricing
Minimum Qty: 10
Multiplier: 1
*Contact for lower quantities*

Panduit
FREC6X4LYL
The FiberRunner 6x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.
Contact for Pricing
Minimum Qty: 10
Multiplier: 1
*Contact for lower quantities*

Panduit
FRFWC6X4LBL
The FiberRunner 6x4 4-Way Cross Fitting attaches to 6x4 channels and/or fittings to create a horizontal 4-way cross intersection with two 6x4 exits.
Contact for Pricing

Panduit
FRT12X4LYL
The FiberRunner 12x4 Horizontal Tee creates a 90 horizontal branch from straight horizontal runs. The horizontal tee provides versatility due to multiple spillout options that include spill-over fittings and the vertical tee which accepts a three-sided trumpet, transition to corrugated tubing and the FiberRunner System.
Contact for Pricing

Panduit
FRFWC4X4LYL
The FiberRunner 4x4 4-Way Cross Fitting attaches to 4x4 channel and/or fittings to create a horizontal 4-way cross intersection with two 4x4 exits.
Contact for Pricing
Minimum Qty: 5
Multiplier: 1
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

Panduit
FROV45SC6LBL
The FiberRunner 6x4 Outside Vertical Cover creates openings for easy access to add or remove cables.
Contact for Pricing
Minimum Qty: 5
Multiplier: 1
*Contact for lower quantities*

Panduit
FRESPKT6
Couple two sections of 6"x4" FiberRunner Routing System channel (sold separately) together with the FRESPKT6 FiberRunner Expansion Splice Kit - 6"x4". Couplers can be installed anywhere in system with the exception of where Lower Trough Support Brackets (part number FDFLMBKT6, sold separately) are located. This coupler kit contains one 6x4 FiberRunner Lower Trough Inner Coupler, one 6x4 FiberRunner Lower Trough Outer Coupler, two 1/4-20 hex nuts and one #8-32 screw.
Contact for Pricing

Panduit
FRAFC58
Two-piece framing clip attaches to auxiliary framing bars. Framing clip halves slide into position and interlock on the auxiliary framing bars, allowing easier assembly of the threaded rod to bars. Contains two-piece framing clip and hardware for attaching framing clip to auxiliary framing bars. (5/8" threaded rod not included.)
Contact for Pricing