Showing 3289-3300 of 19,233 results

Panduit
FRFWC12X4LYL
The FiberRunner 12x4 4-Way Cross Fitting attaches to 12x4 channels and/or fittings to create a horizontal 4-way cross intersection with two 12x4 exits.
Contact for Pricing
Minimum Qty: 5
Multiplier: 1
*Contact for lower quantities*

Panduit
FRVT12X4LBL
The FiberRunner 12x4 Vertical Tee creates a 90 vertical drop from a horizontal run.
Contact for Pricing

Panduit
FRSPJ2X2LBL
The FiberRunner 2x2 Spill-Over Junction Fitting is used in cable routing systems. It assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner Channels. It mounts directly to the existing installation with no alteration required.
Contact for Pricing
Minimum Qty: 5
Multiplier: 1
*Contact for lower quantities*

Panduit
FRIDT4X4LYL
The FiberRunner 2-Port Spillout is used with a 4x4 fitting. The spillout is used to route cable into two separate 1.5 inch (3.8mm) diameter split corrugated tubing.
Contact for Pricing
Minimum Qty: 20
Multiplier: 1
*Contact for lower quantities*

Panduit
FRRF6FR4LBL
The FiberRunner Fitting attaches to a 6x4 FiberRunner fitting or channel to a 4x4 FiberRunner fitting or channel.
Contact for Pricing

Panduit
FRTR12X4LBL
The FiberRunner Bend Radius Control Trumpet is used to limit the bend radius of the cable to 3 inches (76.2mm) when exiting from the 12x4 channel or a 12x4 horizontal tee.
Contact for Pricing

Panduit
FRIDT4X4LBL
The FiberRunner 2-Port Spillout is used with a 4x4 fitting. The spillout is used to route cable into three separate 1.5 inch (3.8mm) diameter split corrugated tubing.
Contact for Pricing
Minimum Qty: 5
Multiplier: 1
*Contact for lower quantities*

Panduit
FRSPJC46LBL
The FiberRunner Cover is used to fully enclose 6x4 channel in conjunction with the FiberRunner Spill-Over Junction FRSPJ4X4LBL. The cover snaps onto the channel base. The hinged feature provides easy access to add or remove cables.
Contact for Pricing
Minimum Qty: 5
Multiplier: 1
*Contact for lower quantities*

Panduit
FRFWCSC6LYL
The FiberRunner 6x4 4-Way Cross Cover is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.
Contact for Pricing
Minimum Qty: 5
Multiplier: 1
*Contact for lower quantities*

Panduit
FREC4X4LBL
The FiberRunner 4x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.
Contact for Pricing
Minimum Qty: 5
Multiplier: 1
*Contact for lower quantities*

Panduit
FRFWCSC12LYL
The FiberRunner 12x4 4-Way Cross Cover is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.
Contact for Pricing

Panduit
FRBC4X4LYL
The FiberRunner 4x4 QuikLock Coupler quickly joins two sections of channels and/or fittings. The coupler delivers fast installations due to toolless installation.
Contact for Pricing
Minimum Qty: 10
Multiplier: 1
*Contact for lower quantities*