Showing 397-408 of 3,357 results

NSI Industries · Polaris · Mechanical Connector
GP-500WC
500 MCM Parallel "T" Tap Connector With Cover Excellent for tapping off main conductor without cutting due to lay-in feature. Perpendicular tap allows for parallel or "T" tap configuration. Flexible cover allows for either parallel or "T" tap wire entry. Secure snap cover eliminates need for taping. Electro-tin plated for low contact resistance. Rated 600V. Temperature rating 90 degrees C.
Contact for Pricing

NSI Industries · Polaris · Mechanical Connector
PAA129
Aluminum Dual Rated Parallel Groove Clamp Pre-Filled With Oxide Inhibitor for 4/0 STR - 2 SOL Aluminum Dual Rated Parallel Groove Clamps are high strength aluminum extruded alloy fittings assembled with steel or anodized high strength aluminum flat washers for heavy duty service entrance or for use as a heavy duty distribution armor rod clamps. The serrated grooves provide increased contact. Supplied pre-filled with oxide inhibitor. Rated 600V. Temperature rating 90 degrees C.,
Contact for Pricing

NSI Industries · Polaris · Mechanical Connector
PAE4141-9
Extruded Parallel Groove Clamp for 4/0 STR to 2 SOL Extruded Parallel Groove Clamps are made of high-strength, heat-treated aluminum alloy. Galvanized steel hardware. Recommended for copper-to-aluminum applications. Supplied pre-filled with oxide inhibitor.
Contact for Pricing

NSI Industries · Polaris · Split Bolts
N-3/0SP
All Purpose Split Bolt Connector 3/0 AWG All Purpose Split Bolt Connectors are used for combinations of aluminum to copper, aluminum to aluminum, steel to aluminum, copper to copper, and steel to copper applications. They have an electro-tinned body. UL listed for copper and copperweld wires only. Includes nut, spacer and pressure pad.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

NSI Industries · Polaris · Split Bolts
N-500SP
All Purpose Split Bolt Connector 500 MCM is used for combinations of aluminum to copper, aluminum to aluminum, steel to aluminum, copper to copper, and steel to copper applications. They have an electro-tinned body. UL listed for copper and copperweld wires only. Includes nut, spacer and pressure pad.
Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*

NSI Industries · Polaris · Split Bolts
N-6SP
All Purpose Split Bolt Connector 6 AWG is used for combinations of aluminum to copper, aluminum to aluminum, steel to aluminum, copper to copper, and steel to copper applications. They have an electro-tinned body. UL listed for copper and copperweld wires only. Includes nut, spacer and pressure pad.
Contact for Pricing

NSI Industries · Polaris · Split Bolts
APS04
Aluminum Dual-Rated Split Bolt 10 SOL - 4 STR Aluminum Dual-Rated Split bolts are made from tin-plated aluminum. UL-486B listed for aluminum and copper conductor combinations.
Contact for Pricing

NSI Industries · Polaris · Split Bolts
SPM-5L
Service Post Connector - One Wire Type 2 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.
Contact for Pricing

Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

ABB - Installation Products · ABB
AL 750-48 TN
Tin-Plated Aluminum Compression Lug, One-Hole NEMA Pad, 750 kcmil AL9CU UL Listed using Intalling Dies 140H, 301, 342, 1 1/2. 700 kcmil, 636(26/7) ACSR. Using Install Tool VC-8 500-750 kcmil AL-CU. 1/2 inch Bolt size. Length 6-3/8 inch. Pad 1-3/4 inch wide x 1-7/8 inch long x 35/64 inch thick. (1) 9/16 inch Diameter Hole. Oxide Inhibitor. Red Cap.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

ABB - Installation Products · ABB
AAPT 2/0-90
Aluminum Compression Pin Terminal 2/0 Stranded Aluminum - Copper. Dies TX, 76, 249, 840, 11A. Oxide Inhibitor. Gray Cap. 90 Degree Bend. 6.875 inches before bend. 4.090 inch overall length after Bend.
Contact for Pricing
Minimum Qty: 150
Multiplier: 150
*Contact for lower quantities*

ABB - Installation Products · ABB
AL 1272-4 N
Aluminum Four-Hole NEMA Lugs, 1272 kcmil AL-CU, installing dies 161, 727, 352, 579. Length 11-1/4 inch. Pad 3 inch wide x 3-5/8 inch long x 1/2 inch thick. (4) 9/16 inch Diameter Holes on 1-3/4 inch Center Spacing. Barrel 6-7/16 inch long x 1-31/32 inch Outside Diameter. Oxide Inhibitor, Yellow Cap.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*