All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 13-24 of 3,357 results

NSI Industries MTK - NSi Industries Vinyl Insulated 493-Piece Miniterm Kit The NSi Industries Vinyl Insulated 493-Piece Miniterm Kit has been carefully designed to include the most popular NSi miniterm terminals. The cases are made of extremely durable polypropylene. They provide the ultimate in organization and convenience. Miniterms are clearly labeled on the inside lid for easy recognition. Convenient size for easy carrying and easy storing. Refillable and reusable. KIT CONTAINS: Quantity SKU Type Wire Size Stud/Tab Size Length Width 40 R22-6V Vinyl Insulated Ring Terminal 22-18 6 .831 .315 40 R22-10V Vinyl Insulated Ring Terminal 22-18 10 .827 .315 30 R16-6V Vinyl Insulated Ring Terminal 16-14 6 .717 .256 30 R16-10V Vinyl Insulated Ring Terminal 16-14 10 .846 .315 20 R12-8V Vinyl Insulated Ring Terminal 12-10 8 1.063 .374 20 R12-14V Vinyl Insulated Ring Terminal 12-10 1/4 1.201 .472 40 F22-250-3V Vinyl Insulated Female Disconnect 22-18 .250 x.032 - - 35 F16-250-3V Vinyl Insulated Female Disconnect 16-14 .250 x.032 - - 20 F12-250-3V Vinyl Insulated Female Disconnect 12-10 .250 x.032 - - 35 B22-V Vinyl Insulated Butt Connector 22-18 - 1.004 - 25 B16-V Vinyl Insulated Butt Connector 16-14 - 1.004 - 15 B12-V Vinyl Insulated Butt Connector 12-10 - 1.063 - 40 S22-6V Vinyl Insulated Spade Terminal 22-18 6 .896 .224 40 S22-10V Vinyl Insulated Spade Terminal 22-18 10 .906 .378 25 S16-6V Vinyl Insulated Spade Terminal 16-14 6 .839 .252 25 S16-10V Vinyl Insulated Spade Terminal 16-14 10 .846 .315 15 S12-8V Vinyl Insulated Spade Terminal 12-10 8 1.012 .354 12 S12-14V Vinyl Insulated Spade Terminal 12-10 1/4 1.287 .354
NSI Industries · NSI · Miniterms

MTK


NSi Industries Vinyl Insulated 493-Piece Miniterm Kit The NSi Industries Vinyl Insulated 493-Piece Miniterm Kit has been carefully designed to include the most popular NSi miniterm terminals. The cases are made of extremely durable polypropylene. They provide the ultimate in organization and convenience. Miniterms are clearly labeled on the inside lid for easy recognition. Convenient size for easy carrying and easy storing. Refillable and reusable. KIT CONTAINS: Quantity SKU Type Wire Size Stud/Tab Size Length Width 40 R22-6V Vinyl Insulated Ring Terminal 22-18 6 .831 .315 40 R22-10V Vinyl Insulated Ring Terminal 22-18 10 .827 .315 30 R16-6V Vinyl Insulated Ring Terminal 16-14 6 .717 .256 30 R16-10V Vinyl Insulated Ring Terminal 16-14 10 .846 .315 20 R12-8V Vinyl Insulated Ring Terminal 12-10 8 1.063 .374 20 R12-14V Vinyl Insulated Ring Terminal 12-10 1/4 1.201 .472 40 F22-250-3V Vinyl Insulated Female Disconnect 22-18 .250 x.032 - - 35 F16-250-3V Vinyl Insulated Female Disconnect 16-14 .250 x.032 - - 20 F12-250-3V Vinyl Insulated Female Disconnect 12-10 .250 x.032 - - 35 B22-V Vinyl Insulated Butt Connector 22-18 - 1.004 - 25 B16-V Vinyl Insulated Butt Connector 16-14 - 1.004 - 15 B12-V Vinyl Insulated Butt Connector 12-10 - 1.063 - 40 S22-6V Vinyl Insulated Spade Terminal 22-18 6 .896 .224 40 S22-10V Vinyl Insulated Spade Terminal 22-18 10 .906 .378 25 S16-6V Vinyl Insulated Spade Terminal 16-14 6 .839 .252 25 S16-10V Vinyl Insulated Spade Terminal 16-14 10 .846 .315 15 S12-8V Vinyl Insulated Spade Terminal 12-10 8 1.012 .354 12 S12-14V Vinyl Insulated Spade Terminal 12-10 1/4 1.287 .354

Contact for Pricing

NSI Industries ITO-4B - The Polaris ITO-4B Multi-Tap Offset Dual-Side Entry Connector features 2 ports sized for 4 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · NSI · Polaris Black

ITO-4B


The Polaris ITO-4B Multi-Tap Offset Dual-Side Entry Connector features 2 ports sized for 4 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries ITO-4C - The Polaris ITO-4C Multi-Tap Offset Dual-Side Entry Vision Tap Connector features 2 ports sized for 4 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Vision Tap

ITO-4C


The Polaris ITO-4C Multi-Tap Offset Dual-Side Entry Vision Tap Connector features 2 ports sized for 4 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries ITG-6B - The Polaris ITG-6B Grey Multi-Tap Single Side Entry Connector features 2 ports sized for 6 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires and pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
NSI Industries · Polaris · Polaris Grey

ITG-6B


The Polaris ITG-6B Grey Multi-Tap Single Side Entry Connector features 2 ports sized for 6 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires and pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.

Contact for Pricing

NSI Industries APS21 - Aluminum Dual-Rated Split Bolt 2 SOL - 2/0 STR Aluminum Dual-Rated Split bolts are made from tin-plated aluminum. UL-486B listed for aluminum and copper conductor combinations.
NSI Industries · Polaris · Split Bolts

APS21


Aluminum Dual-Rated Split Bolt 2 SOL - 2/0 STR Aluminum Dual-Rated Split bolts are made from tin-plated aluminum. UL-486B listed for aluminum and copper conductor combinations.

Contact for Pricing

NSI Industries IPLG3/0-3B - The Polaris IPLG3/0-3B Grey Multi-Tap Single Side Entry Connector features 3 ports sized for 3/0 - 4 AWG Class B, C or D wires or 2/0 - 2 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires with a pre-installed tin plated copper ferule that collapses as the screw is tightened to form a strong connection with fine-stranded wires. Removable access plugs cover the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
NSI Industries · Polaris · Polaris Grey

IPLG3/0-3B


The Polaris IPLG3/0-3B Grey Multi-Tap Single Side Entry Connector features 3 ports sized for 3/0 - 4 AWG Class B, C or D wires or 2/0 - 2 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires with a pre-installed tin plated copper ferule that collapses as the screw is tightened to form a strong connection with fine-stranded wires. Removable access plugs cover the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.

Contact for Pricing

NSI Industries ISPB350-4 - The Polaris ISPB350-4 Multi-Tap Direct Burial Single-Sided Entry Connector features 4 ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
NSI Industries · Polaris · Polaris EDGE

ISPB350-4


The Polaris ISPB350-4 Multi-Tap Direct Burial Single-Sided Entry Connector features 4 ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

NSI Industries SPM-9L - Service Post Connector - One Wire Type 4/0 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.
NSI Industries · Polaris · Split Bolts

SPM-9L


Service Post Connector - One Wire Type 4/0 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

Contact for Pricing

NSI Industries ITO-4 - The Polaris ITO-4 Multi-Tap Offset Dual-Side Entry Connector features 2 ports sized for 4 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · NSI · Polaris Black

ITO-4


The Polaris ITO-4 Multi-Tap Offset Dual-Side Entry Connector features 2 ports sized for 4 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries SITG-1 - The Polaris SITG-1 10-Pack of Replacement Sleeves fit Polaris Grey Multi-Tap Connectors sized for 1 – 10 AWG wires. The sleeves are made from tin plated copper and rated for up to 600V charges. The set screws in Polaris Grey connectors crimp the internal sleeve when tightened, ensuring a strong connection with fine-stranded copper wires. These replacement sleeves allow connectors to be re-used like brand new. Use these connectors in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
NSI Industries · Polaris · Polaris Grey

SITG-1


The Polaris SITG-1 10-Pack of Replacement Sleeves fit Polaris Grey Multi-Tap Connectors sized for 1 – 10 AWG wires. The sleeves are made from tin plated copper and rated for up to 600V charges. The set screws in Polaris Grey connectors crimp the internal sleeve when tightened, ensuring a strong connection with fine-stranded copper wires. These replacement sleeves allow connectors to be re-used like brand new. Use these connectors in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.

Contact for Pricing

Panduit PNF14-6F-C - Fork Terminal, nylon insulated, funnel entry, 16- 14 AWG, #6 stud size, standard package.
Panduit

PNF14-6F-C


Fork Terminal, nylon insulated, funnel entry, 16- 14 AWG, #6 stud size, standard package.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

NSI Industries ISPB2/0-3B - The Polaris ISPB2/0-3B Multi-Tap Direct Burial Single-Sided Entry Connector features 3 ports sized for 2/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds UL 486D and ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
NSI Industries · Polaris · Polaris EDGE

ISPB2/0-3B


The Polaris ISPB2/0-3B Multi-Tap Direct Burial Single-Sided Entry Connector features 3 ports sized for 2/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds UL 486D and ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.

Contact for Pricing

Showing 13-24 of 3,357 results