All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 109-120 of 3,357 results

NSI Industries IPLD1/0-4C - The Polaris IPLD1/0-4C Multi-Tap Dual-Sided Entry Vision Tap Connector features 4 ports sized for 1/0 AWG - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Vision Tap

IPLD1/0-4C


The Polaris IPLD1/0-4C Multi-Tap Dual-Sided Entry Vision Tap Connector features 4 ports sized for 1/0 AWG - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

NSI Industries ITD-2/0CB - The Polaris ITD-2/0CB Multi-Tap Dual-Sided Entry Vision Tap Connector features 2 ports sized for 2/0 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Vision Tap

ITD-2/0CB


The Polaris ITD-2/0CB Multi-Tap Dual-Sided Entry Vision Tap Connector features 2 ports sized for 2/0 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries IPLD750-10 - The Polaris IPLD750-10 Multi-Tap Dual-Sided Entry Connector features 10 ports sized for 750 - 250 MCM wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLD750-10


The Polaris IPLD750-10 Multi-Tap Dual-Sided Entry Connector features 10 ports sized for 750 - 250 MCM wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries IPL1/0-4 - The Polaris IPL1/0-4 Multi-Tap Single Side Entry Connector features 4 ports sized for 1/0-14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPL1/0-4


The Polaris IPL1/0-4 Multi-Tap Single Side Entry Connector features 4 ports sized for 1/0-14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

NSI Industries IPL1/0-5 - The Polaris IPL1/0-5 Multi-Tap Single Side Entry Connector features 5 ports sized for 1/0-14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPL1/0-5


The Polaris IPL1/0-5 Multi-Tap Single Side Entry Connector features 5 ports sized for 1/0-14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

NSI Industries ITO-1/0 - The Polaris ITO-1/0 Multi-Tap Offset Dual-Side Entry Connector features 2 ports sized for 1/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · NSI · Polaris Black

ITO-1/0


The Polaris ITO-1/0 Multi-Tap Offset Dual-Side Entry Connector features 2 ports sized for 1/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries IPLD750-12 - The Polaris IPLD750-12 Multi-Tap Dual-Sided Entry Connector features 12 ports sized for 750 - 250 MCM wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLD750-12


The Polaris IPLD750-12 Multi-Tap Dual-Sided Entry Connector features 12 ports sized for 750 - 250 MCM wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries IPLG1-3 - The Polaris IPLG1-3 Grey Multi-Tap Single Side Entry Connector features 3 ports sized for 1 - 10 AWG Class B, C or D wires or 2 - 10 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires with a pre-installed tin plated copper ferule that collapses as the screw is tightened to form a strong connection with fine-stranded wires. Removable access plugs cover the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
NSI Industries · Polaris · Polaris Grey

IPLG1-3


The Polaris IPLG1-3 Grey Multi-Tap Single Side Entry Connector features 3 ports sized for 1 - 10 AWG Class B, C or D wires or 2 - 10 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires with a pre-installed tin plated copper ferule that collapses as the screw is tightened to form a strong connection with fine-stranded wires. Removable access plugs cover the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

NSI Industries HTGE-250 - Use the NSI HTGE-250 Two-Way Basket Ground Clamp to ground electrical connections in distribution/pole transformers. This clamp is cast from high conductivity copper alloy and comes with cast bronze eyebolts, both of which are high strength and guarantee durable performance when grounding transformers in harsh environments. Strong stainless-steel nuts and lockwashers are standard on all two-way basket ground clamps. Additionally, the flat surface acts as a seal to the tank. HTGE series ground clamps provide a hex or square shoulder for wrench tightening and come tin plated by adding the suffix ‘TN’ for additional corrosion resistance. Use the HTGE-250 when running ground wire in the range of 6 SOL to 250 MCM. Stock products you can rely on—stock NSI.
NSI Industries · Polaris · Grounding

HTGE-250


Use the NSI HTGE-250 Two-Way Basket Ground Clamp to ground electrical connections in distribution/pole transformers. This clamp is cast from high conductivity copper alloy and comes with cast bronze eyebolts, both of which are high strength and guarantee durable performance when grounding transformers in harsh environments. Strong stainless-steel nuts and lockwashers are standard on all two-way basket ground clamps. Additionally, the flat surface acts as a seal to the tank. HTGE series ground clamps provide a hex or square shoulder for wrench tightening and come tin plated by adding the suffix ‘TN’ for additional corrosion resistance. Use the HTGE-250 when running ground wire in the range of 6 SOL to 250 MCM. Stock products you can rely on—stock NSI.

Contact for Pricing

NSI Industries IPL3/0-4B - The Polaris IPL3/0-4B Multi-Tap Single Side Entry Connector features 4 ports sized for 3/0-6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPL3/0-4B


The Polaris IPL3/0-4B Multi-Tap Single Side Entry Connector features 4 ports sized for 3/0-6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries ISPB350-6 - The Polaris ISPB350-6 Multi-Tap Direct Burial Single-Sided Entry Connector features 6 ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
NSI Industries · Polaris · Polaris EDGE

ISPB350-6


The Polaris ISPB350-6 Multi-Tap Direct Burial Single-Sided Entry Connector features 6 ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

Panduit P14-10R-M - The P14-10R-M Pan-Term Terminal is a non-insulated, ring terminal. Brazed seam protects terminal barrel from splitting during the crimp process. Internal barrel serrations assure good wire contact and maximum tensile strength.
Panduit

P14-10R-M


The P14-10R-M Pan-Term Terminal is a non-insulated, ring terminal. Brazed seam protects terminal barrel from splitting during the crimp process. Internal barrel serrations assure good wire contact and maximum tensile strength.

Contact for Pricing

Minimum Qty: 1000

Multiplier: 1000

*Contact for lower quantities*

Showing 109-120 of 3,357 results