Z fitting 2 hole support for 4-inch use. It is made with 1/4-inch thickness and has an outside width of 1-5/8 inches. The holes are 9/16 inch in diameter and the finish is electro-galvanized.

Fitting, 90 Degree, Height 1-7/8 Inches, Base Length 2 Inches, Hole Diameter 9/16 Inches, Steel with Magnets

Fitting, 90 Degree, Height 1-7/8 Inches, Base Length 2 Inches, Hole Diameter 9/16 Inches, Steel with Magnets

Fitting, 90 Degree, Height 4-1/8 Inches, Base Length 3-1/2 Inches, Hole Diameter 9/16 Inches, Steel

Fitting, 90 Degree, Height 4-1/8 Inches, Base Length 3-1/2 Inches, Hole Diameter 9/16 Inches, Hot-Dip Galvanized Steel

Fitting, 90 Degree, Height 4-1/8 Inches, Base Length 1-5/8 Inches, Hole Diameter 9/16 Inches on 1-7/8 Inch Centers, Hot-Dip Galvanized Steel

Fitting, 90 Degree, Height 4-1/8 Inches, Base Length 3-1/2 Inches, Hole Diameter 9/16 Inches, Electro-Galvanized Steel

90 Degree Angle Fitting, 1-7/8 Inch X 5-7/8 Inch

A 2 hole cross corner angle for steel angle applications. It has a 90° angle and 1/4″ thickness. The finish is electro-galvanized.

Surface Raceway and Lighting Systems, Tapped End Cap, 12 gauge, Steel, Electro Galvanized, for 3/4 inch or 1 inch Conduit, Furnished complete with 1/4 inch X 5/8 inch flat head machine screw and AB100-1/4 Springless Nut. For E Series Channel.

Channel Bracket. 90 Degree Angle. 1 Hole on short side, 9/16 Inch Diameter. 7-7/8 Inch X 1-5/8 Inch. Width 3-1/2 Inch. Thickness 1/4 Inch. Zinc coating is applied by hot-dipping after fabrication. Is in conformance with ASTM A-123, Grade 65 specification standards. Minimum of 2.5 mill thickness.

Fitting, 90 Degree, Height 1-7/8 Inches, Base Length 2 Inches, Hole Diameter 9/16 Inches, Electro-Galvanized Steel with Magnets