Eva actuator for use with Adam DYN and Adam OSSD sensors. With Eva Unique Code, the pair forms a high level coded non-contact safety sensor. 4 pcs of DA 2B spacer rings are included. Coated PCBA for extra protection in demanding environments.

Two-hand device with JSTD1-B Safeballs. Safeballs are side mounted on a 44x88 extruded aluminum profile designed for two-hand applications. Pre-wired to a M12-5 male connector with protective flanges of the safeballs.

IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

DNP31.0 DeviceNet Interface

MTQ22-FBP.0 ModbusTCP Interface for 4 devices

EKIP COM PROFIBUS

EKIP COM PROFINET

Safety mat with no trim, 48 inch x 48 inch, with 10m cable with flying leads coming out of long side, made our of Polyurethane, black with Eurodot design

Safety mat with no trim, 36 inch x 48 inch, with 10m cable with flying leads coming out of long side, made our of Polyurethane, black with Eurodot design

Safety mat with no trim, 30 inch x 30 inch, with 10m cable with flying leads coming out of long side, made our of Polyurethane, black with Eurodot design

Safety mat with no trim, 24 inch x 60 inch, with 10m cable with flying leads coming out of long side, made our of Polyurethane, black with Eurodot design

Safety mat with no trim, 36 inch x 42 inch, with 10m cable with flying leads coming out of long side, made our of Polyurethane, black with Eurodot design