EKIP COM PROFINET

VITAL 1 SAFETY CONTROLLER

ETHTB-FBP.4 Terminal blocks, 4pcs for Ethernet interfaces and UMC100.3

EKIP COM DEVICENET

Anybus module for PROFIBUS 1 port.

Two-hand device with JSTD1-B Safeballs. Safeballs are side mounted on a 44x88 extruded aluminum profile designed for two-hand applications. Pre-wired to a M12-8 male connector with protective flanges on the safeballs.

IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

PDP32 PROFIBUS DP Interface

CEM11-FBP.120 Earth Leakage Monitor 120

UMC100-Democase 110/230VAC Supply with devices, motor and operation elements

CEM11-FBP.35 EARTH LEAKAGE MON.