Harness Board Nails

Electrical Equipment, Components, and Supplies

Electrical Hardware And Supplies

    Cable Clamp And Staple

    Cable Clips

    Cable Splicing Kits

    Cable Tie Kit

    Cable Tie Mounts

    Cable Ties

    Connector Mounting Hardware

    Din Rail

    Electrical Cable Grip

    Electrical Hangers

    Electrical Insulators

    Electrical Receptacle Multipliers

    Harness Board Nails

    Heat Shrinkable Tube

    Strain Reliefs

    Wallplates

    Wire And Cable Pulling Device

Showing 1-12 of 42 results

Panduit QB-SN2-Q - Single nail holder to accommodate one 2 nail.
Panduit

QB-SN2-Q

Single nail holder to accommodate one 2 nail.

Contact for Pricing

Minimum Qty: 50

Multiplier: 25

*Contact for lower quantities*

Panduit QB-RER.5-X - Quick-Build Peg with RER.5 pre-installed for use with Quick-Build System, 10 per package
Panduit

QB-RER.5-X

Quick-Build Peg with RER.5 pre-installed for use with Quick-Build System, 10 per package

Contact for Pricing

Minimum Qty: 50

Multiplier: 10

*Contact for lower quantities*

Panduit QB-FN2-Q - Five nail holder to accommodate up to five 2 nails.
Panduit

QB-FN2-Q

Five nail holder to accommodate up to five 2 nails.

Contact for Pricing

Minimum Qty: 50

Multiplier: 25

*Contact for lower quantities*

Panduit QB-SN1-Q - Single nail holder to accommodate one 1 nail.
Panduit

QB-SN1-Q

Single nail holder to accommodate one 1 nail.

Contact for Pricing

Minimum Qty: 50

Multiplier: 25

*Contact for lower quantities*

Panduit QB-RERBASE-X - Quick-Build Peg suitable to utilize existing RER.5, RER.75, and RER1.25 products with Quick-Build System. No tools or screws required. Color: Black, 10 per package
Panduit

QB-RERBASE-X

Quick-Build Peg suitable to utilize existing RER.5, RER.75, and RER1.25 products with Quick-Build System. No tools or screws required. Color: Black, 10 per package

Contact for Pricing

Minimum Qty: 50

Multiplier: 10

*Contact for lower quantities*

Panduit QB-BASE120-Q - Mounting platform that is inserted in Quick-Build pegs 1.2 x 1.2 (30.48mm x 30.48mm), Allows test fixtures, corner posts, wire end holders,and other harness board accessories to be installed to provide a complete Quick-Build™ harness system. Compatible with #8 screw size. Screw length will vary based on test fixtures and accessories used. Note: Consider multiple QB-BASE120-Q components for large test fixtures.
Panduit

QB-BASE120-Q

Mounting platform that is inserted in Quick-Build pegs 1.2 x 1.2 (30.48mm x 30.48mm), Allows test fixtures, corner posts, wire end holders,and other harness board accessories to be installed to provide a complete Quick-Build™ harness system. Compatible with #8 screw size. Screw length will vary based on test fixtures and accessories used. Note: Consider multiple QB-BASE120-Q components for large test fixtures.

Contact for Pricing

Minimum Qty: 50

Multiplier: 25

*Contact for lower quantities*

Panduit QB-WEH1012-Q - Quick-Build Wire End Holder for Quick-Build System. Suitable for #10-#12 gauge wire, holds 3 Wires. Color: Yellow, 25 per package
Panduit

QB-WEH1012-Q

Quick-Build Wire End Holder for Quick-Build System. Suitable for #10-#12 gauge wire, holds 3 Wires. Color: Yellow, 25 per package

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Panduit QB-FN1-Q - Five nail holder to accommodate up to five 1 nails.
Panduit

QB-FN1-Q

Five nail holder to accommodate up to five 1 nails.

Contact for Pricing

Minimum Qty: 50

Multiplier: 25

*Contact for lower quantities*

Panduit QB-FN3-Q - Five nail holder to accommodate up to five 3 nails.
Panduit

QB-FN3-Q

Five nail holder to accommodate up to five 3 nails.

Contact for Pricing

Minimum Qty: 50

Multiplier: 25

*Contact for lower quantities*

Panduit QB-BASE175-Q - Mounting platform that is inserted in Quick-Build mounting pegs 1.75 x 1.75 (44.45mm x 44.45mm), Allows elastic retainers, wire end holders, corner postes, bundle retainers and other harness board accessories to create a complete Quick-Build™ harness system. Compatible with #4, #6, #8, and 1/4 screws.
Panduit

QB-BASE175-Q

Mounting platform that is inserted in Quick-Build mounting pegs 1.75 x 1.75 (44.45mm x 44.45mm), Allows elastic retainers, wire end holders, corner postes, bundle retainers and other harness board accessories to create a complete Quick-Build™ harness system. Compatible with #4, #6, #8, and 1/4 screws.

Contact for Pricing

Minimum Qty: 50

Multiplier: 25

*Contact for lower quantities*

Panduit QB-SN3-Q - Single nail holder to accommodate one 3 nail.
Panduit

QB-SN3-Q

Single nail holder to accommodate one 3 nail.

Contact for Pricing

Minimum Qty: 50

Multiplier: 25

*Contact for lower quantities*

Panduit QB-RER1.25-X - Quick-Build Peg with RER1.25 pre-installed for use with Quick-Build System, 10 per package
Panduit

QB-RER1.25-X

Quick-Build Peg with RER1.25 pre-installed for use with Quick-Build System, 10 per package

Contact for Pricing

Minimum Qty: 50

Multiplier: 10

*Contact for lower quantities*

Showing 1-12 of 42 results