Bar joist washer for use with a 3/8" bolt in bar joist hanger applications. It is made of steel with a zinc plated finish. The sheet lists the size as 0.27 x 2.37 x 1.26 and thickness as 0.060, with 2 holes and a silver color.

Lag screw shield for mortar joint applications. It is made of zinc with no additional finish. The shield is 5/16 in. diameter and 1-3/4 in. long, with a 1/2 in. drill size and 2-1/4 in. minimum embedment depth.

Cage Nut Kit, #10-32 Size, 50 piece(s), 5/8 in. length, Pan head, Slotted/Phillips/Square drive type, Lead Point, Black Phosphate finish, including a(n) #10-32 Cage Nuts and #10-32 x 5/8 in. Pan Head Screw. For use with Telecom Cabinets, Relay Racks and Patch Panels KIT

Square Channel Washer, Stainless Steel, 1/4 in. bolt sizes, 1/4 in. depth, Silver color, 50 per pack

C-Clamp, Steel Wide Jaw, Rod Size 1/2 Inch, Design Load 500 Pounds, Malleable Iron

5/8-11 x 16 Hex Hd Bolt 18-8 Stainless Steel u/m 100

#6 x 1/2 Pan Hd Phillips DRILL TIP #2 Point 410 Stainless Steel

Two-hole strap for electrical conduit applications. It is made of steel with a pre-galvanized finish and is designed for use on loads too heavy to be supported by 1-hole straps. The strap fits 1/2" rigid/IMC conduit and SER cable #2 and has two mounting holes.

Locknut, Conduit Size 1/2 Inch, Width 1.140 Inch, Thickness 0.125 Inch, Die Cast Zinc

PC ASSY LUC LOWER UPPER CARRIAGE 9Pin J1

External front operation handle I-0 type V0 Black IP65

10-32 x 1-1/2 Round Head, Combo Drive, Stove Bolt Kit, 100 per pack