Showing 385-396 of 1,342 results

Mersen's complete line of single and dual pole in-line fuseholders accommodate Class CC fuses. The fuseholders are designed for quick installation. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field. Three internal O-rings per pole seal the fuseholder providing a water-resistant compartment for the fuse. The captive O-rings are colored (blue for single pole and red for dual pole) for quick detection. Optional cone shaped insulator boots can be slipped on to provide a watertight seal (breakaway versions come with boots standard). Both single and dual pole versions have an optional breakaway feature which safely disconnects the load in case of a pole knockdown. Fuses remain safely encapsulated within the watertight fuse holder on the load side. Once the pole has been reinstalled the fuseholder can be easily reconnected. Y terminal boot
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

PC board mount fuse clip for 5mm diameter fuses, 1/4" diameter fuses, and 13/32" diameter fuses 250 Volts 15 Amps 1/4 inch ferrule (silver plated) series.
Contact for Pricing

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Fuse Holder UltraSafe™ 600VAC 600VDC Class J 60A 1-Pole LED Pressure Plate IP65
Contact for Pricing

Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

Fuse Holder UltraSafe™ 600VAC 600VDC Midget 30A 3-Pole+N LED Pressure Plate IP20
Contact for Pricing

Fuse Holder UltraSafe™ 600VAC 600VDC Midget 30A 4-Pole LED Pressure Plate IP20
Contact for Pricing

Littelfuse · ATO Series
0FHA0001SXJ
ATO INLINE FUSEHOLDER 20A,32V. The Molded Fuseholder is a versatile fuseholder for in-line applications. Regular Duty: Use with ATO® Fuse 1 to 20 amps. Supplied with two 4" wire leads of 16 gauge black wire. Heavy Duty: Use with ATO® 25 and 30 amp fuses for air conditioner or other heavy duty applications. Supplied with two 4" wire leads of 12 gauge orange wire. FHA 30 includes 30 amp fuse.
Contact for Pricing
Minimum Qty: 20
Multiplier: 20
*Contact for lower quantities*

HAZGARD fuses are designed to provide overcurrent protection for forklifts and other low voltage equipment used in hazardous locations. This product is UL 248 recognized and has been evaluated for the use in UL 583 type EE and ES applications. Unique design does not require an explosion proof enclosure, saving assembly costs.
Contact for Pricing

HAZGARD fuses are designed to provide overcurrent protection for forklifts and other low voltage equipment used in hazardous locations. This product is UL 248 recognized and has been evaluated for the use in UL 583 type EE and ES applications. Unique design does not require an explosion proof enclosure, saving assembly costs.
Contact for Pricing