POWR-BLOKS power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary power into secondary circuits. LX2XXX-DIN series offers integral DIN-Rail mount and an optional hinged safety cover.

Littelfuse DIN series Class CC fuse blocks have integral DIN rail mounting capabilities that allow secure mounting to 35mm "hat" type DIN rails. New releasable mechanism allows installation and removal of block without removing adjacent components on DIN rail. Electrical panel builders and machine builders no longer need to use mounting adapters, saving assembly time and related costs.

Fuse supports, non-disconnecting, are used primarily in potential transformer circuits, or where there is some other disconnecting or isolating device in series with the fuse in the circuit. Disconnecting switch devices have the additional feature of serving to isolate the equipment they protect. It should be noted that disconnecting switches are not load-breaking devices, therefore, the circuit must be open prior to the fuse disconnection. Select either a fuse support or a disconnecting switch for each fuse. Fuse supports and disconnecting switches include live parts for both ends. Both fuse supports and fuse disconnect switches can be mounted vertically or horizontally. The type EK are used for indoor installations while the type EKO are used outdoors. 15500 Volts ADG series.

Fuse Block 1000VAC 1000VDC 200A 1-Pole Stud center to center: 2.88 inch

Fuse Block 1000VAC 1000VDC 1000A 1-Pole Stud center to center: 4.97 inch

Fuse Block 250VAC 250VDC Class R 30A 3-Pole Screw with Reinforced Clip

Fuse Block 600VAC 600VDC Class CC 30A 1-Pole Copper Box

Fuse Block 600VAC 600VDC Class G 15A Adder Screw with Reinforced Clip

Fuse Block 600VAC 600VDC Class G 15A 2-Pole Screw with Reinforced Clip

Fuse Block 600VAC 600VDC Class H/K 100A Adder Copper Box

Fuse Block 300VAC 300VDC Class T 60A 3-Pole Copper Box

Fuse Block 600VAC 600VDC Class T 30A 1-Pole Box with Reinforced Clip