Fuse Block 600VAC 600VDC Class CC 30A 1/4in Quick Connect / Solder 90 angle screw Knob Panel Mount

Fuse Block 1500VAC 1500VDC 400A 1-Pole Stud M8

Fuse Block 1500VAC 1500VDC 800A 1-Pole Stud M10

Fuse Block 1500VAC 1500VDC 800A 1-Pole Stud 3/8 inch

Fuse Block 1000VAC 1000VDC 400A 1-Pole Stud center to center: 4.06 inch

Fuse supports, non-disconnecting, are used primarily in potential transformer circuits, or where there is some other disconnecting or isolating device in series with the fuse in the circuit. Disconnecting switch devices have the additional feature of serving to isolate the equipment they protect. It should be noted that disconnecting switches are not load-breaking devices, therefore, the circuit must be open prior to the fuse disconnection. Select either a fuse support or a disconnecting switch for each fuse. Fuse supports and disconnecting switches include live parts for both ends. Both fuse supports and fuse disconnect switches can be mounted vertically or horizontally. The type EK are used for indoor installations while the type EKO are used outdoors. 15500 Volts EKO-3D CGL series.

Clips and Live Parts for size D(3) diameter fuses, for ferrule mounting

Fuse Block 600VAC 600VDC Class R 200A 1-Pole Box Side-Clip

BB18 is a three-phase busbar terminal power feed lug, which is intended for use with LPSM/LPSC series fuse holders. See datasheet for more detailed specifications.

The new Littelfuse Class H blocks offer many advantages over previous generations that are noted in the features and benefits section. Class H and Class R fuse blocks are dimensionally the same, but Class R blocks incorporate a rejection feature, which only allows Class R fuses to be inserted.

Fuse Block 600VAC 600VDC 30A 1/4in Quick Connect / Solder 1/4 Turn Bayonet Knob Panel Mount

Fuse Block 600VAC 600VDC 30A 1/4in Quick Connect / Solder 90 angle screw Knob Panel Mount