Socket driver for 3/8" threaded rod. It is an installation tool for installing rod hangers in concrete. The sheet identifies it as a vertical mount driver.

Rod Hanger Driver Wood/Steel

Socket driver for 1/4" rod hangers. It is an installation tool for installing rod hangers in concrete. The sheet identifies it as a vertical mount driver.

Socket driver installation tool for installing wood rod hangers in wood. It is made of steel with a polished finish. The sheet identifies it as a wood socket drive tool for driving wood rod hangers.

This is a drop-in anchor setting tool for installing 3/8" drop-in anchors. It has a pin length of 33/64". The sheet identifies it as a Cully tool from Minerallac.

A Sammys installation tool for Swivel Sammys 3/8" Rod SH-TEK 50 and SH-GST/CST 20. It is made of steel with a nickel finish. The tool has a #14 drive size and a hex shank type.

This is a cable tie gun used to quickly tension and cut off excess zip tie straps. It is intended for 18 to 40 lb nylon cable ties. The tool is made of steel and plastic.

HangerMate threaded rod anchoring system installation tool for 3/8-16 or 1/4-20 threaded rod. It is a HangerMate Driver (ZE 215) made of steel with a plain finish. The tool measures 2-7/16 in. long and 3/4 in. wide.

This is a HangerMate masonry install tool, a recessed drive sleeve used for installing HangerMate anchors. It is made of steel with a plain finish. The tool measures 5-1/2 inches long and 7/8 inch wide.

Change over kits allow for installation of heavy cross section MRT and MRS style ties, and MRT double wrapped style ties in MTRTH tools.

ERGO HAND TOOL FOR A,B,C FLAG TERMS

Cable Tie Installation Tool, Economic Tensioning Tool, for Ladder Type or Strap Type or Ball-lock Type, Stainless Steel, Cut-off By Hand Activated Lever. Width up to 12mm (0.47 inch).