The FiberRunner 1-Port Spillout is used in cable routing systems to route into one piece of 1.5 inch (38mm) diameter split corrugated tubing. It is used with a spill-over junction with a 2x2 exit and the 2x2 FiberRunner Hinged Channel. The spillout is made of ABS plastic and yellow.

The direct mounting strut bracket in black is 1.6 (40.6 mm) high, 46.3 (1176.0 mm) long, and 1.6 (40.6 mm) wide. It is designed for use on a Net-Access N-Type or S-Type 47.2 (1200 mm) Cabinet that is not elevated. The strut bracket comes in standard packages of one.

The elevated trapeze bracket in black is 16.8 (426.7 mm) high, 46.3 (1176.1 mm) long, 3.4 (86.4 mm) wide, and 46.3 (1176.1 mm) deep. It is designed for use on a Net-Access N-Type or S-Type 47.2 (1200 mm) Cabinet that is elevated. The bracket comes in standard packages of one.

The direct mounting strut bracket in black is 1.6 (40.6 mm) high, 34.9 (886.5 mm), and 1.6 (40.6 mm) wide. It is designed for use on a four-post rack. The strut bracket comes in standard packages of one.

The Wyr-Grid Snap-On Sidewall Bracket is used in cable routing systems to retain cables and can be attached anywhere along the pathway. The 6 inch snap-on sidewall bracket is 8.9 inches H x 1.2 inches L x 3.71 inches W (226.1mm x 30.5mm x 94.2mm).

The Wyr-Grid black powder coated, snap-on sidewall is 2.0" (50 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

WBF2 is an electrical wire or cable raceway component. The sheet lists it with a height of 4-1/4 in and a width of 4-1/4 in. No material or finish is printed on the sheet.

Hammer On pipe sleeve positioner for use with Schedule #40, #80, and smaller wall thickness pipe. It is made of spring steel and is sized for sleeve diameters from 4 to 6 inches. The listed overall dimensions are 1-1/16 inch height, 1-1/4 inch width, and 1/2 inch depth.

Our MST Strand Mounting Bracket is a robust solution designed for mounting MST enclosures on overhead cables. It facilitates easy installation and maintenance in aerial network deployments.

The FiberRunner 6x4 Vertical Tee Fitting attaches to a 6x4 channel and/or fitting to create a 90 vertical drop from a horizontal run. A hinged door is included. The vertical tee fitting requires a coupler to attach a trumpet or 3-port spillout to a vertical exit. It accepts the optional snap-on cover in conjunction with the channel.

The Rubber Foam Tape is 1/32" X 0.75" X 7YD, for use with Surface Raceway

The Rubber Foam Tape is 1/32" X 0.75" X 72YD, for use with Surface Raceway