The Wyr-Grid 24" (609.6 mm) FiberRunner QuikLock Trapeze Bracket is made of steel and is black powder coated. It is 12.2" (309.9 mm) high, 24.7" (627.4 mm) long, 2.3" (58.4 mm) wide, and 24.7" (627.4 mm) deep. It attaches to the Wyr-Grid 24" (609.6 mm) wide pathway to support a secondary FiberRunner 4 x 4 or 6 x 4 channel above the Wyr-Grid pathway. It adjusts 6.6" (166.6 mm) to 9.9" (251.0 mm) over the top surface of the Wyr-Grid pathway. It comes in standard packages of one.

The Wyr-Grid 30" (762.0 mm) FiberRunner QuikLock Trapeze Bracket is made of steel and is black powder coated. It is 12.2" (309.9 mm) high, 30.7" (779.8 mm) long, 2.3" (58.4 mm) wide, and 30.7" (779.8 mm) deep. It attaches to the Wyr-Grid 30" (762.0 mm) wide pathway to support a secondary FiberRunner 4 x 4 or 6 x 4 channel above the Wyr-Grid pathway. It adjusts 6.6" (166.6 mm) to 9.9" (251.0 mm) over the top surface of the Wyr-Grid pathway. It comes in standard packages of one.

The direct mounting strut bracket in black is 1.6 (40.6 mm) high, 40.3 (1023.6 mm) long, and 1.6 (40.6 mm) wide. It is designed for use on a Net-Access N-Type or S-Type 42.1 (1070 mm) Cabinet that is not elevated. The strut bracket comes in standard packages of one.

Straight splice connector with clips joins two 8" (204 mm), 12" (305 mm), or 18" (457 mm) wide Wyr-Grid Pathways together. A bonded connection is possible with the black powder coated splice. In order to make the connection, the powder coat must be properly removed from the pathway surfaces that contact the zinc-plated clip on the back side of the splice. The package contains two components needed to join two pathway sections. Each package contains one straight splice connector.

The pre-galvanized metal divider wall in gray is 4.0 (102 mm) high. It is used to provide cable separation on the Wyr-Grid overhead cable tray routing system's pathway sections. It is designed to help route and manage copper, fiber optic, or power cables. The divider comes in standard packages of one with two 63" (3200.4mm) divider walls.

The Wyr-Grid Cable Side Waterfall is used in cable routing systems and designed to maintain a 3 inch (76mm) bend radius. The cable side waterfall helps transition fiber optic, power, and copper data cables from within the Wyr-Grid Wire Rack. It snaps on to an 8 inch (203mm), 12 inch (305mm), 18 inch (457mm), 24 inch (610mm), or 30 inch (762mm) pathway section without any tools needed.

The FiberRunner 1-Port Spillout is used in cable routing systems to route into one piece of 1.5 inch (38mm) diameter split corrugated tubing. It is used with a spill-over junction with a 2x2 exit and the 2x2 FiberRunner Hinged Channel. The spillout is made of ABS plastic and yellow.

The above floor raceway wall transition fitting is a fitting designed for use with the above floor raceway channel AFR4BCBL6. The above floor raceway wall transition fitting helps to run cables from the floor directly into the wall. It is black.

The above floor raceway table leg fitting is a fitting designed for use with the above floor raceway channel AFR4BCBL6. The above floor raceway table leg fitting is designed to manage and conceal cables running from the floor to a table. It is black.

Wyr-Grid Replacement Cutting Die for the automatic cutting tool.

The Panduit Cantilever Bracket is used in cable routing system which supports the 18 inch basket. The mounting hardware for attaching the cantilever bracket is sold separately.

The Panduit Cantilever Bracket is used in cable routing system which supports the 4 inch basket. The mounting hardware for attaching the cantilever bracket is sold separately.