The Panduit Cantilever Bracket is used in cable routing system which supports the 18 inch basket. The mounting hardware for attaching the cantilever bracket is sold separately.

The Panduit Cantilever Bracket is used in cable routing system which supports the 4 inch basket. The mounting hardware for attaching the cantilever bracket is sold separately.

The Panduit Cantilever Bracket is used in cable routing system which supports the 12 inch basket. The mounting hardware for attaching the cantilever bracket is sold separately.

WBF2 is an electrical wire or cable raceway component. The sheet lists it with a height of 4-1/4 in and a width of 4-1/4 in. No material or finish is printed on the sheet.

Hammer On pipe sleeve positioner for use with Schedule #40, #80, and smaller wall thickness pipe. It is made of spring steel and is sized for sleeve diameters from 4 to 6 inches. The listed overall dimensions are 1-1/16 inch height, 1-1/4 inch width, and 1/2 inch depth.

The direct mounting strut bracket in black is 1.6 (40.6 mm) high, 40.3 (1023.6 mm) long, and 1.6 (40.6 mm) wide. It is designed for use on a Net-Access N-Type or S-Type 42.1 (1070 mm) Cabinet that is not elevated. The strut bracket comes in standard packages of one.

The pre-galvanized metal divider wall in gray is 2.0" (50 mm) high. It is used to provide cable separation on the Wyr-Grid overhead cable tray routing system's pathway sections. It is designed to help route and manage copper, fiber optic, or power cables. The divider comes in standard packages of one with two 63" (3200.4mm) divider walls.

The Wyr-Grid Support Bracket is used to support the 12.0" (304.8 mm) wide Wyr-Grid Pathway to standard 3.0" (76.2 mm) or 6.0" (152.4 mm) EIA channel racks. It is black powder coated and is 3.4" (86.4 mm) high, 16.5" (419.1 mm) long, and 7.6" (193.0 mm) wide. The bracket can be installed as a parallel or perpendicular support for the Wyr-Grid Pathway and attaches directly to Panduit channel racks. It comes in standard packages of one.

The Wyr-Grid Support Bracket is used to support the 18.0" (457.2 mm) wide Wyr-Grid Pathway to standard 3.0" (76.2 mm) or 6.0" (152.4 mm) EIA channel racks. It is black powder coated and is 3.4" (86.4 mm) high, 22.5" (571.5 mm) long, and 7.6" (193.0 mm) wide. The bracket can be installed as a parallel or perpendicular support for the Wyr-Grid Pathway and attaches directly to Panduit channel racks. It comes in standard packages of one.

The Wyr-Grid Support Bracket is used to support the 24.0" (609.6 mm) wide Wyr-Grid Pathway to standard 3.0" (76.2 mm) or 6.0" (152.4 mm) EIA channel racks. It is black powder coated and is 3.4" (86.4 mm) high, 28.5" (723.9 mm) long, and 7.6" (193.0 mm) wide. The bracket can be installed as a parallel or perpendicular support for the Wyr-Grid Pathway and attaches directly to Panduit channel racks. It comes in standard packages of one.

Used to fully enclose 6x4 channel in conjunction with the Spill-Over Junction FRSPJ4X4BL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

The FiberRunner 6x4 Spill-Over Fitting Cover is used to fully enclose 6x4 channel in conjunction with the 4x4 spill-over junction. The spill-over junction cover snaps onto the channel base. It has a hinged feature that allows easy access to add or remove cables.